What are the two important objectives of lighting?
100
12 channels
How many channels do the Colorado Zoom Tour use?
100
Press record -> Press cue -> any number -> enter
How do you store a cue?
100
Watts = Amps x Volts
How do you calculate power?
100
Using the lows on the EQ.
How do you fix a "boomy" voice?
200
A wide range of fixture types and a wide variety of light techniques
What is multi-fixture light?
200
22 channels
How many channels does the Design Spot Pro 300 use?
200
Standard Mode
What mode do you work with Design Spot 300 Pro?
200
Potential
Define volts or what are volts?
200
Highs & Lows
Which frequencies are fixed frequencies?
300
For specific applications to reduce the general lighting and draw attention to any object or part of the stage.
What are "Specials" used for?
300
Channel 16; 32-63
What channel opens the shutter? And at what value?
300
A pattern made with shadow. (design)
What is a gobo?
300
The flow of electricity
Define amps or what are amps?
300
One is used for monitors and the others are used for effects(reverb)
What is the difference between pre & post fader?
400
Using one light to strongly motivate directional lighting with a single shadow
What is single source lighting?
400
Press record -> Press scene -> give it a number -> Go back to fixture to recall it
How do you save a scene?
400
Digital multiplex: Network protocol like MIDI, Internet. Lighting language.
What is DMX?
400
-How power is measured
-How many amps in a second
-the amount of work being done
Define watts or what does watts stands for?
400
Reduces signal by minus 20db, good for signals that are TOO LOUD.
What is the Pad used for?
500
A Yale graduate of Drama, proposed stage lighting be broken up into a number of ACTING AREAS, with 2 fixtures.
Who was Stanley McCandless?
500
One is a DMX channel and the other is a collection of 1 or more fixtures.
What is the difference between an address and a channel?
500
A mechanical device that limits amount of light (close or open, ex: human eyes)
What is an Iris
500
Ohms (omega)
What is Resistance measured in?
500
-mute and press the PFL button on selected channel
-put the fader down
-use gain to make your signal reach 0db
-Un-mute, un-press PFL button, & raise fader