Amalgams
Rubber Dam
Oral Appliances
Implants
Potpourri
OSHA
100

 Instrument used to carve the anatomy of the occlusal surface for an amalgam restoration

What is Discoid-cleoid

100

This is not an indication for placement of a rubber dam

What is behavior management 

100

When fabricating an oral appliance using a thin thermoplastic material, it is important to allow the material to sag_____inches before vacuum forming it

What is .25 to 0.5

100

This material exhibits osseointegration when used for implants.

What is Titanium

100

The seal of Acceptance is issued to a product that follows ADA guidelines for ____ many years

Three

100

____objects must be heat sterilized in steam, dry heat, or saturated chemical vapor

What is critical

200

Identify an item that is not a benefit of finishing and polishing amalgam restorations

what is increased corrosion

200

The object that secures the rubber dam onto the tooth

What is a clamp

200

An oral appliance with proper care should last how long

What is 2 years

200

The type of dental implant consists of a plate and several bolts that transverse the mandible.

What is transosseous

200

Name an example of a Class II medical device

What is composite restorative material

200

The primary goal of an infection control plan is to prvent cross-contamination between 

What is patients and dental care providers

300

A thin ledge of amalgam extended beyond the cavosurface margin is known as 

What is Flash

300

This is used to prevent aspiration of the clamp

What is floss

300

Thermoplastics are polymers that _____when heated. 

What is soften

300

This type of dental implant is placed on the mandibular bone below the periosteum

What is subperiosteal

300

Dental prothesis should be stored in a/n_______environment and never allowed to ___as they may____

Wet, dry our, and distort

300

Name the type of gloves that are nonsterile and are used for procedures that are noninvasive

What are exam gloves

400

An open margin in an amalgam is the result of 

What is condensation

400

First step rubber dam placement

What is make sure there is no contraindications in their medical history

400

The oral appliance designed to alleviate tooth surface wear is a

What is a nightguard

400

This is a type of implant that is screwed or pressed into a hole cut into the mandible of the maxilla. 

What is endosseous

400

Materials set___in the mouth compared to on the instrument tray/countertop.

Faster

400

Hepatitis B and Hepatitis C are transmitted this way

What is through blood

500

The dental hygienist should avoid this during amalgam finishing and polishing

What is generating heat while finishing and polishing

500

Before you dismiss a patient it is necessary to inspect the dental dam for all of the following except

What is deformation of the material

500

This is NOT a contraindication for placement of a dental implant

Restoration of an atrophic mandible.

500

This is the type of model that a restoration or appliance is fabricated.

What is a cast. 

500

The phase of matter with the weakest atomic bond strength is 

Gas

500

Define what a critical instrument is

What is one that can penetrate bone or soft tissue

M
e
n
u