MIRU / Rig Down
Drill Surface Hole
Nipple Up / Nipple Down
Drill / Trip
Run / Cement Casing
100
What measurement is used to confirm square on string off?
6/8/10 OR as long as you go in 2’s
100
What is the capacity bbls/ft of a 17 3/4 hole?
.3061
100
What size B.O.P ring fits a 13-5/8", 10,000 psi B.O.P?
BX-159
100
When should you check the C.O.M?
On 1st conn or 1st STD
100
What is the capacity bbls/ft of 9 5/8 csg, 40.00 wt per ft, ID 8.835?
.0758
200
Name four models of topdrives.
NOV, CanRig, Rostel, Tesco
200
What should you do before taking a WLS?
Circulate a few minutes to ensure hole is clean and check equipment.
200
How many bolt holes are in an 11”, 5,000 psi B.O.P?
12
200
What is TVD?
True Vertical Depth
200
What section in the HSE Field Reference Manual discusses High Pressure Pumping operations?
5.4
300
When Rigging Up / Down Subs & Derrick, what should always be installed?
Fall Protection Equipment
300
What formula is used to convert torque to line pull?
Torque value divided by tong arm length
300
What diameter bolt would you need for a 13-5/8", 5,000 psi B.O.P?
1 5/8"
300
How often should you take Slow Pump Rates?
Every 500’ or change in mud weight
300
What should you do to a float or shoe collar before making them up onto casing string?
Check to make sure they will open.
400
What model of topdrive does Precision own?
Rostel
400
What document should be completed before spudding in?
Rig inspection
400
What size nut does a 13-5/8", 5,000 psi B.O.P have?
2 9/16"
400
How often should you fill the hole when tripping out?
Every 5 stds of drill pipe, every 3 stds of heavy weight drill pipe, 1 std of drill collars or a 75 psi reduction in hydrostatic pressure.
400
What section of the HSE Field Reference Manual discusses cementing?
5.1
500
What section of the HSE Field Reference Manual can you find Rig Up, Rig Down, Rig Out?
5.5
500
What is the torque requirement for an 8" DC with a 2-13/16" ID with thread type 6-5/8 reg?
53,300
500
How much does an 11”, 10,000 psi Cameron double ram weigh?
11,300 lbs
500
What is the torque for a 4-½" XH 6’’ DC with 2-½" I.D?
23,400
500
What page number in the HSE Field Reference Manual is running casing?
250
M
e
n
u