General Safety
Under the 100% safe policy, what is the first thing you should do when you encounter unsafe behavior?
Stop the unsafe work being performed
Buddy System: For high risk activities, how often should you check in?
5-10 Minutes
When can tinted safety glasses not be worn?
Indoors or in low light conditions.
6
When using a sling to lift a load, what happens to the tension on each sling leg as the sling angle becomes more horizontal?
It increases.
PTP Huddle: What should we be doing to increase participation?
Encourage participation and engagement.
Can you wear a safety shirt instead of a safety vest?
Yes, as long as it has ANSI class II or class III reflectors.
Entering a confined space without a _____ ______ or without confusing and confirming atmospheric testing and monitoring.
valid permit
When working around operating heavy equipment, what is the safest way to approach an operator?
Establish positive communication and receive acknowledgment.
When do we wear A9 cut resistant sleeves?
When working around sharp materials and cut hazards.
When doing overhead drilling and grinding, what additional PPE is required?
Either face shield or goggles.
Mobile Equipment: Disabling or overriding safety devices, operating equipment beyond load limits, or failing to maintain safe distance from ________ __________.
overhead powerlines.
What should you do with a fall-protection harness or lanyard that has been subjected to a fall?
Remove it from service immediately
How should manual scrapers be stored?
Use guards, covers, manufacturer sleeves, or approved tool cabinets
What cut level gloves are required?
Level 9 cut resistance.
Lifting Operations: Name one of the three violations.
- A safe distance is not maintained from overhead powerlines.
- A lift is conducted beyond the working load limits of the equipment
- The load is positioned directly above personnel with no warning or exclusion zones
What is the name of the mental health program included with your Turner benefits?
Lyra Health, they provide 8 free therapy sessions a year, as well as other benefits
New hires will wear a ____ helmet band during their first __ days to increase visibility, encourage mentorship, and reinforce safe work habits.
Green, 30
What are 2 requirements for cutting materials?
Two hands on the tool and using a cutting station.
Ground or hard surface disturbance without locates. What are examples of utility locates?
As-Builts, GPR, X-Ray, Scanning/Tracing Systems