Construction Types
This construction type is pretty normal, and can be recognized by its non-combustible exterior walls, often made of block, brick, or treated wood.
Type III Ordinary Construction
This Occupancy group is described as being used by 6 or more people for education purposes through grade 12
Termites and Carpenter ants will eat the cellulose that holds this building material together
Wood
This type of anchor has the strongest hold of any fastener in hollow walls
Toggle bolts
If you do not wear these, Nate will be upset.
safety glasses
This Type of construction is characterized by large wooden beams.
Type IV Heavy Timber
cold-rolled steel
A coating that can be applied to fasteners is damp environments, but is not appropriate for submerged locations
Hot-dipped Galvanized
Good________can be the difference between a good or bad reputation for you and your contractor
housekeeping
This Construction Type is typical for small commercial buildings and single family homes.
Type V Wood Frame Construction
Theaters, Clubs, Stadiums, and Places of worship are example of this occupancy group.
Group A Assembly
These are the 4 ingredients that make concrete
Sand (small aggregate), Stone (large aggregate), Cement, and Water
This Type of fastener is best suited for dry environments.
zinc-plated
Hasps, cables, locks, and checklists are part of a contractor's _________program
Lock Out Tag Out
Type II Construction is also known as this.
Non-Combustible
Hotels and Apartments belong to this occupancy group
These are the 3 types of stress that all building materials must endure
Compression, Tension, Shear
What size drill bit should be used for a 1/4" concrete screw
3/16"
If a space contains a material that may engulf a worker entering the space it is considered this.
Permit Space
This Type of Construction can be recognized by intumescent insulation on its structural steel components
Type I Fire Resistive
Cyanide Manufacturing plants would be considered to be this type of occupancy
Group H High Hazard
This section of wooden joists must not be drilled or cut
The middle 1/3
Which Type of Stainless steel should be used for being submerged in water or chemicals?
316 Stainless Steel
scaffold planking should have this amount of overlap if it is not cleated on both sides
12 inches