Scope Safety
Cleaning & Disinfection
Patient Monitoring
Documentation
Emergency Preparedness
100

This must be checked on the scope before use to ensure there are no leaks.

Leak test

100

The first step in cleaning an endoscope right after a procedure.

Pre-cleaning at bedside

100

This vital sign must be continuously monitored during sedation.

oxygen saturation

100

This must be recorded for every scope used on a patient.

Scope tracking (serial number/log)

100

This must be immediately available in case of a cardiac emergency.

ACLS cart

200

Damaged scopes should be handled this way.

Removed from use and reported

200

This process uses chemicals to kill microorganisms on scopes.

High-level disinfection

200

This is used to monitor heart rhythm during procedures.

Cardiac monitor (ECG)

200

Any complication during a procedure must be recorded in this.

Patient chart or procedure note

200

Staff must be trained in this life-saving skill.

CPR (Basic Life Support)

300

This helps ensure scopes are safe to use on the next patient.

Reprocessing

300

Scopes must be completely dry before this step.  

Storage

300

Blood pressure should be checked at this frequency during procedures.

Regular interval (5 minutes) per policy

300

This must be obtained before the procedure begins.

Informed consent

300

This medication reverses opioid sedation.

Naloxone

400

This test ensures no residual protein remains after cleaning.

Cleanliness/protein test

400

Staff must wear this when handling contaminated scopes.

Personal protective equipment

400

This scale is often used to assess sedation level.

Sedation scale

400

This log tracks scope cleaning and disinfection cycles.

Reprocessing logs

400

Oxygen delivery equipment must always be this.

Available and functioning
500

This must be done if a scope fails a leak test before use.

Remove it from service and send it for repair

500

This step must occur between cleaning and high-level disinfection to ensure effectiveness.

Proper rinsing and inspection

500

This is required before discharge to ensure the patient has safely recovered from sedation.

Post-sedation assessment

500

This must be documented if there is a break in the reprocessing cycle or concern with a scope.

Incident report

500

This must be checked regularly to ensure emergency medications are safe to use.

Expiry dates and ACLS cart checks

M
e
n
u