Engine Disassembly
Engine Tools
Measuring Tools
Air Induction
Engine Operating Principles
100
an Imperfection that impairs value or useability.
What is a Defect
100
used to support the weight of an engine to make overhaul easier.
What is an Engine stand
100
Provides an accurate reference for measuring warpage of machined surfaces.
What is a Precission Straight edge.
100
Indicates increasing restriction in the induction system due to a dirty air filter or damaged component.
What is an air restriction indicator
100
Location of the piston at its lowest point of travel.
What is botom dead center
200
To weaken or destroy gradually by chemical means.
What is to Corrode
200
tool used to test valve spring operating tension.
What is Valve spring tester
200
Measures clearance between 2 surfaces
What is a feeler gauge.
200
Mechanically driven Supercharger
What is a Blower
200
Measurement of an engines power.
What is horsepower
300
The inability to perform a desired function; usually occurs prematurely or unexpectedly
What is Failure
300
used to remove gears using torque or hydraulic pressure.
What is a Gear Puller
300
Measures outer diameters and thickness, read on a graduated scale
What is a micrometer
300
Forcing air into the cylinders above atmospheric pressure; usually applies to devices that have a direst mechanical connection.
What is Supercharged
300
Sequence in which the cylinders deliver their power strokes, begins with number one cylinder
What is Firing order
400
To bond to a moving part through excessive pressure, temperature, or friction
What is to Seize
400
Aids installation of piston and ring assembly into the cylinder bore or liner.
What is a ring compressor
400
Measures back and forth movement of a component
What is a dial indicator
400
Using an exhaust driven compressor unit to force air into the cylinders, has no direct mechanical connection to the engine
What is Turbocharged
400
Distance the piston travels from TDC to BDC, or from BDC to TDC
What is the Stroke
500
by product of combustion deposited on piston domes, rings,ring grooves,clinder heads, valves,and injector tips
What is Carbon Deposits
500
Compresses the valve spring allowing the removal or installation of the valve spring keepers.
What is a valve spring compressor
500
Measures distance between 2 surfaces.
What is a depth gauge.
500
Engine that does not use superchargers or turbochargers
What is naturally aspirated.
500
Burning the air fuel mixture to produce heat
What is Combustion
M
e
n
u