Before You Go
Hazards
Operating
Max/Min
General
100
Do this before you operate...
What is a pre use inspection
100
Power line danger
What is electrocution
100
Do not use the platform controls to free
What is a snagged platform
100
500 lbs
What is Maximum platform capacity
100
Drive very carefully when near
What is holes and drop-offs
200
After the pre-use inspection and before moving
What is Do a function test
200
Besides a mushy surface - what your machine can become unstable in
What is gusty winds
200
Do not use the machine as a ground when
What is Welding
200
2 or less
What is Maximum number of people on the platform
200
Don’t extend, rotate or raise the boom above horizontal if
What is Tilt alarm sounds
300
Making sure the worksite is safe
What is a work area inspection
300
the type of surface to operate on
What is firm and level
300
Using a harness can prevent
What is being thrown out
300
20 percent or 11 degrees
What is Maximum slope rating
300
Lightning and storms mean
What is don’t operate the machine
400
You must have one - just in case
What is a Rescue Plan
400
Don’t rely on this to check for a level machine
What is a tilt alarm/level indicator
400
Attaching overhanging loads to any part of this machine causes
What is a Tip over
400
150 pounds
What is maximum side force allowed
400
Making the platform higher with these - not good!
What is ladders or scaffolds
500
From the ground control panel and the platform panel
What is perform a function test
500
If the tilt alarm sounds when you are elevated....
What is carefully retract the boom
500
Before attempting to free the platform using the ground controls
What is remove all personnel from platform
500
At least 10 feet
What is minimum safe distance from any power line
500
This must be the correct weight on an electric machine
What is the battery
M
e
n
u