TROUBLESHOOTING
CALIBRATION
CONFIGURATION
DIAGNOSTICS
PARTS
100
You'll set the multimeter to this in order to check the fuses.
What is ohms/the horseshoe/resistance?
100
3000 & 8000
What are the speeds at which you calibrate the centrifuge?
100
These are the three nomogram targets (for milliliters).
What is 690, 825, and 880?
100
This device is diagnosed at 50mmHg.
What is the cuff?
100
This part is the "brain" of the machine.
What is the CPU board?
200
You'll see "Code 7 CRC Error".
What happens if I wipe the memory?
200
This MUST be calibrated after A/D.
What is the safety system.
200
When the machine is new/transferred, you receive a new CPU board, or the memory is wiped.
When is it necessary to perform configuration?
200
If you see this, it means your valve needs to be replaced.
What is hi-cur?
200
These two parts team up to keep track of the volume of blood processed.
What are the blood pump and BLAD?
300
This is the part of the fault that tells you what the PCS-2 was doing.
What is the "command"?
300
5v & 28v
What are the two voltages you can adjust on a TODD power supply?
300
Grams or mililiters.
What are the units of measure?
300
This device is diagnosed at 300mmHg.
What is the DPM?
300
These two parts team up to ensure blood doesn't enter the bottle.
What are the line sensor and bowl optics?
400
You should do this after verifying the problem.
What is checking the power supply?
400
3071
What is the ideal line sensor open value.
400
These are the only two protocols used in most plasma centers.
What are PPP and NaCL?
400
These are the only two components that can be calibrated in diagnostics.
What are the line sensor and bowl optics?
400
They come in 4-pin and 6-pin varieties.
What are valves?
500
Safety System Fault 4000
What is a power supply fault?
500
These numbers should never be equal.
What are the offset and fullscale?
500
00A000
What is the format of the machine serial number?
500
The acceptable range for diagnosing this device is +/- 100.
What is the centrifuge?
500
These parts are interchangeable. (Name two pairs)
What are the ACAD and DLAD 1? OR What are the BLAD and DLAD2? OR What is the blood pump/rotor and AC pump/rotor? OR What are the valves?
M
e
n
u