This is the amount of time a the consignor must forward a report of shipment (REPSHIP) to the consignee of shipments departure
What is 2 hours
100
This is a family of standards size of prefabricated cushioning shipping containers
What are fast packs
100
All markings and labeling must be in accordance with this regulation
What is MIL-STD-129
100
This is the margin of safety for a band saw
What is 2 inches
100
This is used for address markings on all domestic and overseas shipments
What is DD Form 1387
200
Within this many hours is a TDR issued when a RESHIP is not acknowledged by a receipt from the destination
What is 24 Hours
200
Category 1 reusable containers are designed to last throughout the transportation system for this many trips
What is 100 trips
200
When discrepancies in a shipment are noted, you must prepare an SF 361, Report of Discrepancies (ROD), as required by which regulation
What is DOD 4500.9R
200
This is the most common defect in box construction
What is inadequate nailing
200
This document annotates the stock number that corresponds with the SPI number and is generated by the SBSS system
What is DD Form 1348-1A
300
This is the minimum transportation protective service required for a shipment of secret material
What is Protective Security Service (PS)
300
This is the most important and frequent use for cushioning
What is absorption
300
This is the AF regulation for all hazardous shipments
What is AFMAN 24-204
300
This type of power saw is primarily used for cross cutting wood
What is a radial arm saw
300
This document verifies a fund cite account for shipping
What is a DD Form 406
400
This protective service requires constant surveillance of a shipment by the qualified carrier representative, and includes the requirement of a Signature and Tally Record
What is DOD Constant Surveillance Service
400
These are the two most common material conditions annotated on a DD Form 1348-1A
What is serviceable and unserviceable?
400
This publication regulates all hazardous material by domestic commercial modes of transportation
What is the Title 49, Code of Federal Regulations, (49 CFR)
400
This type of packaging process is designed to prevent physical damage and maintain electrical lead and terminals in an "as well manufactured" conditional during handling and transportation
What is ESD (Electrical Discharge Protective Packaging)
400
This form annotates and verifies the shipment that is cleared for hazardous substance from internal combustion.....a.k.a Drained and Purged
What is the AFTO Form 20
500
This is the protective service that has the same requirements as a dual driver protective service, but the drivers must undergo a DOD national Agency Check for trustworthiness
What is What is Dual Driver Protective Service with National Agency Check
500
This formula is used to calculate the center of balance for a vehicle
What is Dimension1 X Weight1 + Dimension2 X Weight2/ Gross Weight
500
Which joint regulation for all DOD components establishes uniform requirements for the preservation of material acquired, stored or shipped
What is AF Pamphlet 24-237 (AFPAM 24-237)
500
Daily Double:!!!!! These are the three most important factors in heat sealing