Safety
Also known as Occupational safety and Health Administration
OSHA
Testing laboratory that determines if products comply with standards to be tested.
UL (Underwriters Laboratories)
what is 1/2 + 1/2
1
A short handheld screwdriver
Stubby
The setting used on a multi meter When checking to see if a wire is broken or has a continuous path for current to flow
Continuity
Should be worn at all times especially when using power tools and hand tools
Safety Glasses
Electrical boxes
3/8 + 1/2
7/8
Also known as side cutters
Lineman pliers
Hot, neutral and ground make up a?
Circuit
Can happen when persons or equipment come into contact with a power source
Electrical Shock
Used to cover electrical connections in boxes
Cover Plates
3/16 + 3/8
9/16
Also known as Diagnol Cutters
Dykes
When energizing a 3 way switch, which terminal does our line(hot) wire go to?
Common terminal
Regulations that enforce quality and safe electrical installations and give guidelines and rules on how things should be installed and calculated.
NEC
Used to pass current to devices
Conductors/wires
A^2 + B^2 = C^2 is the equation for
Pythagorean theorem
Handheld tool that Cuts holes in wallboard and Sheetrock.
Keyhole, compass, jab saws
When energizing a GFCI or AFCI, which side do we connect to?
Line side
Type of ladder that should be used near energized components
Fiber Glass
NM stands for
Nonmetallic- Sheated cable
One angle of a triangle is 50 Degrees, another is 75 degrees. What is the 3rd angle?
180-75-50= 55 Degrees
Used to tighten bolts and fasteners to a specific torque
Torque Wrench
A GFCI protected lighting circuit is energized from a GFCI. Which side of the GFCI is this load connected to?
LOAD side