Compared to MOSFETs, BJTs can drive this more of "this" between the collector and emitter compared to a mosfet's Drain to source.
What is more current?
In the lab, this amplifier worked as the best start to a multistage amplifier.
What is a Differential Amplifier.
The Unit for this variable is Amps per Volts^2
What is Beta
____ does not depend on Vbc
____does depend on Vbe
What is Ic?
What are new datasheets.
Unlike the the mosfet, in order to bias the BJT, we must avoid using this method because BJTs are not voltage driven.
what is node voltage method.
This is the draw back of using the "common" type of amplifiers.
What is lack of gain?
Indicated in parenthesis by the variables, (ON) can tell us that the mosfet is definitely NOT in this mode.
What is Cutoff?
In an IC Amplifier, we should avoid these two components in our design.
What is resistors and capacitors.
This is the Vt to a BS250 Pmos transistor.
what is -1 to -2.4
The new name for Cutoff, linear and Saturation.
What is Cutoff saturation and active?
Find it online bruh.
The maximum power can be calculated this way on a mosfet.
What is V*I, but it can't go over Maximum P.
OR
Vmax*someI
OR
SomeV*MaxIThe unit for forward transconductance.
What is Siemens.
This is the Drain Source Breakdown Voltage of a BS250 pmos mosfet.
What is between -70 -60
Look it up, I'm not spending the $20 on pasting an image here.
Derive the operating equations of a simple mosfet current mirror. (just Id1 is fine)
Id1 = (beta*(Vgs-vt)^2)*0.5;
Or
Id1 = (Beta1/Beta2)*Ibias;
This variable on the datasheet has a range and can determine whether or not the mosfet is conducting.
What is Vt?
What is Cascoding.
This is the difference between the small signal model of a mosfet and BJT.
What is the inclusion of r sub pi? or Vbe?
Draw and Label the structure of a PNP transistor.
Look it up buddy.
Draw the Small signal circuit for a multistage amplifier (Section B).
Scroll to section B and compare.
Applying too much Voltage across the drain source makes the mosfet go in this region.
What is breakdown.
Bonus if you can figure out if it is due to the diode or the D channel.
Draw the small scale model of a Differential Amplifier.
Look up in notes.
When your Vc>Vb and Ve>Vb you are in this region of a BJT.
What is Active mode?