Equipment Inspection
What is, fire extinguisher.
Before exiting the machine the bucket should be where?
What is on the ground.
Retraining should take place in the event of what?
What is an accident.
Forklifts are most stable when?
What is when the center of gravity is maintained
True or False: If you take the safety portion of an equipment training, you are authorized to operate that equipment on your own.
False
These are documented on an inspection and reported to the equipment department?
What is, Damaged or Not Functioning Parts
Can turn sharply and remain within this?
What is, its own wheel base.
When driving an aerial lift the basket must be positioned how?
What is perpendicular to the ground.
Forks should be at this height while traveling
What is 4-6 inches off the ground.
Required before an individual is allowed to operate equipment.
What is, McLean Training
Where should equipment be parked when performing an inspection?
What is flat level ground.
When traveling down hill with a load what direction should the machine face.
What is backwards.
When working in an aerial lift this is required 100% of the time when working over land.
What is, personal fall arrest system.
Must be worn during operation
What is seat Belt
True or False:
Annual crane inspections, at McLean, are conducted in-house.
False
What should be inspected prior to operating that is not part of the machine itself.
What is the work area.
Changing these can effect the machines likelihood of tipping.
What is Attachments
Aerial lifts shall not be used as a what?
What is crane.
This document is required if an accident occurs
What is pre-use inspection report
True or False
A worker in an aerial lift, over water, is permitted to unhook their personal fall arrest system.
True
What is tagging out the machine.
This will help you travel safely if your vision is obscured by a load.
What is a spotter.
When working in an aerial lift you must be tied off to what.
What is, a designated anchor point.
The acronym ROPS stands for this
What is Rollover Protection Structure
One of McLean's 9 life safety rules regarding equipment operations.
What is performing a pre-use inspection