Who's responsible for picking up FOD?
Everyone, everywhere, all the time
This type of PPE must be worn when noise levels exceed 85 decibels over an 8-hour period.
Hearing Protection
These labels must be clearly visible on all hazardous material containers to identify the contents and associated risks.
Hazard warning labels
Who is responsible for assigning online training?
Training Department
Is piggybacking through the gate okay?
No!
If TSA catches you, they will take your badge.
OSHA requires this area to be kept clear and unobstructed to ensure safe emergency evacuations.
Fire exits
Is a harness necessary to use even when performing duties in a man-basket?
Any employee performing duties in a man-basket must be wearing an approved harness.
This document provides detailed information on handling, storing, and responding to exposure to hazardous materials.
Safety Data Sheet (SDS)
How do you know when you need an aircraft inspector sign off when performing a maintenance task?
When the item having maintenance performed falls under the "Required Inspections Items List" per Everts GMM
Who are the three non-Everts entities need to be notified when an incident on the ramp occurs?
Airport Police, Airport Fire and Airport Operations
What has been known to happen when dust accumulation is exposed to an ignition source?
It ignites causing an explosion.
According to OSHA, these must be worn to protect your eyes from flying particles, molten metal, or chemical splashes.
Safety Goggles or Safety Glasses
When storing flammable liquids, OSHA requires these specially designed cabinets to prevent fires and contain spills.
Flammable storage cabinets
As a certified mechanic, where should you keep your certificate license while working on aircraft?
In the immediate area of where the work is being performed.
FAR Title 14 1, D, 65.89
What are two things that need to be visible when out on the ramp?
Airport Operations Badge and reflective outerwear.
According to OSHA, this must be kept clean and orderly to prevent slips, trips, and falls.
Walking and working surfaces
This type of PPE is designed to protect workers from respiratory hazards like dust, fumes, and harmful gases.
Respirator
According to OSHA, incompatible hazardous chemicals must be stored this way to prevent dangerous reactions.
Separately or segregated areas
What hangar equipment does Everts employees need formal, hands-on training?
Tugs, Pettibone, Forklifts, Overhead Crane, Man-lifts, Zamboni floor sweeper.
What areas of the terminal are you allowed to go with an AOA badge?
Terminal access is generally restricted to only those with Security Identification Display Area (SIDA) Badges.
OSHA requires containers for oily rags and other flammable waste to be made of this type of material and equipped with a self-closing lid.
This is the first step in determining what PPE is needed for a job, as required by OSHA.
Hazard Assessment
How many spill kits are located in the hangar and where are they located?
4
By the supervisor's office, by the Nose Dock, by the EAA office, and by the Battery Room
What are the 2 ways to obtain your A&P certificate and how long does it take for each one?
Formal Education- 18-24 months/ 1900 hours
OJT- On the job training- Minimum 18 months/ 2880 hours. For both ratings Airframe and Powerplant, 30 months/4800 hours.
6 feet