On the Table
This is placed on the deck to hold labware
Carrier
Find the serial number of an instrument
Back of back panel or on back of instrument
This is a sequence of RoMa movements
Vector
What key brings up onboard help?
F1
What should be the first command of a script for Liquid systems?
Wash tips
The physical worktable must __________________the worktable in EVOware.
match exactly
Remove the "Tip is Broken" selection after resolving an issue
Confirguration/Devices Tab/Instrument Options/LiHa
These are the RoMa movements between Safe and End position
Waypoints
What is a fixed tip?
Steel tips that aren't disposable
Command used to repeat a command or set of commands
Loop
What is one consideration for worktable design?
Arms must be able to reach/ proximity to carrier
Find where the backup is saved
Configure/General Tab/Protocol Options
What should be done before teaching the RoMa?
Align RoMa fingers
Which axis is up and down?
Which variable is used to limit a script to the actual number of samples?
SAMPLE_CNT
Name 1 way to Save a Worktable as Template
Right click on any grey area on the worktable/Click button in upper right/Click option in Infopad
Teach the LiHa to a microplate
Right click on the microplate on worktable/Edit Labware
Command used to move labware from 1 position to another
Transfer Labware
What is the lowest position of the well/tube?
Z-max
Functionality used most often to cherry pick or normalize a plate
Worklisting
Which labwares do we NOT duplicate?
DiTi Carriers and labware. Also wash station and waste
Let EVOware know the DiTis have been replaced before a run
Use Direct Command Set DiTi position
This setting is used if coordinates are not adjusted to the site, but are the same for all sites
Absolute
If well_offset is equal to 3, which well would be pipetted into next?
4
Uses include: shorten long scripts, create a library of scrips and multitasking
Subroutines