Hand Protection
True or False: Gloves alone provide the greatest degree of protection against hand injuries.
What is False?
True or False: Hiring someone else to transport and dispose of waste transfers responsibility from the generator.
What is False?
The two categories of hot work defined by AOL.
What are welding and burning hot work, and non-welding and burning hot work?
This ASME code governs the design and installation of offshore production platform piping systems.
What is ASME B31.3?
General duty gloves must meet at least this ANSI cut resistance level.
What is A3?
NORM waste must be handled as radioactive material if readings exceed this threshold.
What is 25 µR/hr or twice background radiation?
A new hot work permit must be issued if work is delayed or suspended for more than this amount of time.
What is one hour?
The maximum spacing allowed between handrail panels.
What is 3.5 inches?
Arena Offshore was founded in this year and has grown into a leading operator on the Gulf of Mexico Shelf.
What is 2002?
Impact gloves must include this level of impact protection.
What is Level 2?
Cylinders with residual pressure and hazardous gas must be managed as this type of waste.
What is hazardous waste?
Fire watch personnel are allowed to monitor this many hot work permits at a time.
What is one?
This type of joint is strictly prohibited in piping fabrication.
What is a miter joint?
After acquiring this field from Exxon in 2019, Arena redeveloped its LL15 and OO10 sands with a 2021 drilling campaign.
What is GA 209?
The type of gloves required for painting and blasting activities.
What are leather gloves with forearm protection?
Supersacks for spent blasting sand should never be filled beyond this fraction.
What is three-quarters full?
Hot work must stop immediately if the LEL reading is greater than this percentage.
What is 0%?
Coatings must not be applied if the surface temperature is less than this many degrees above the dew point.
What is 5°F?
The control option that is most effective according to the hierarchy of controls.
What is Eliminate Risk?
Scrap metal must screen below this radiation level for NORM.
What is 4 μR/hr?
Welding should never be conducted during this type of operation due to stray electrical currents.
What is wireline operations?
Shackles and slings must have a safe working load of this multiple of the maximum sling load.
What is 1.25 times?