FALL PROTECTION
6 FEET
What is HEIGHT THAT FALL PROTECTION IS REQUIRED IN CONSTRUCTION
5000 lbs.
What is AMOUNT OF WEIGHT THAT A ANCHOR POINT MUST SUPPORT.
Free Fall distance
This should be considered when identifying a tie off point
18 TO 19 FEET
HOW HIGH OFF THE FLOOR DO YOU HAVE TO TIE-OFF TO STOP IF YOU FALL WITHOUT HITTING THE FLOOR
What are places you can fall from ?
Unguarded floor/wall openings, platforms, loading docks, roofs, stairs, ladders/scaffolds.
BEAM CLAMP
What is TYPE OF ANCHOR THAT SHOULD BE USED IN A STEEL STRUCTURE
When does OSHA require user to inspect their Fall Protection equipment ?
Before every use
42" +/- 3"
HOW HIGH DOES A HAND RAIL HAVE TO BE POSITIONED
These protective measures must be taken to prevent objects fro falling and striking a person when working on scaffolding.
What is toe boards, debris nets, or canopies ?
Three Types of Fall Protection
What are:
1. Fall Arrest Systems
2. Fall Restraint Systems
3. Positioning Device Systems
CENTER OF YOUR BACK BETWEEN YOUR SHOULDER BLADES
WHAT IS THE CORRECT WAY THAT YOUR D-RING SHOULD BE IF YOU ARE WEARING YOUR HARNESS CORRECTLY
4"
HOW HIGH DOES A TOE-BOARD NEED TO BE
This person must inspect your fall protection system on a monthly basis.
What is a competent person ?
THE HIGHTEST POINT ABOVE YOUR HEAD
What is HEIGHT REQUIREMENT FOR ATTACHING A ANCHOR DEVICE
SNUG BUT NOT TIGHT, BUT NOT LOOSE
What is PROPER WAY TO ADJUST YOUR LEG STRAPS WHILE WEARING YOUR HARNESS
Workers injured in falls from this object are usually less than 10 feet above the ground.
What is a ladder ?
When three of your four limbs are in contact with the ladder at all times.
What is the 3-Point system/3 Points of Contact?