This is the draw command that allows you to draw multiple lines that are one object.
What is the polyline command?
100
This is one half of the diameter of a circle.
What is a radius?
100
This is the technique used to draw a line consistent in thickness.
What is twisting the pencil?
100
More than one of these views makes up a multi-view drawing.
What is an orthographic view?
200
This is the space where you set up to print in CAD.
What is paper space?
200
When using the trim command, this is the line that must be selected first.
What is the cutting element?
200
This is a word used to note the diameter of a hole.
What is a ream (or drill)?
200
When taping down a drawing that has already been started, this is used to line up the drawing with the T-square.
What is a line that has already been drawn?
200
These are the lines used to transfer geometry from views in a multi-view drawing.
What are projection lines?
300
This is the box or window that allows you to see your model through your paper space.
What is a viewport?
300
When using the offset command, this must be specified before selecting the object to offset.
What is the offset distance?
300
This is the diameter of a circle with a 7/8" radius.
What is 1-3/4"?
300
This is the instrument used to draw circles.
What is a compass?
300
These are the types of lines used to show geometry beyond.
What are hidden lines?
400
When selecting objects, windowing in this direction will select objects only completely within your window.
What is from left to right?
400
This type of polygon is created by the corners of the polygon touching a circle with a specified radius.
What is inscribed?
400
This is the expression of 4.5 feet in inches.
What is 54 inches?
400
This is an instrument used to draw something larger or smaller than it actually is.
What is a scale?
400
These are the lines used to show the locations of circles.
What are center lines?
500
When inputting absolute coordinates, you need to turn this off, or CAD will assume you are inputting a relative coordinate, even if you do not use the @ symbol.
What is dynamic input?
500
When using the stretch command, these objects should be completely within your window.
What are objects that are moving?
500
This is the radius of a circle with a 3-5/8" diameter.
What is 1-13/16"?
500
This is the actual length in inches of a line that measures 9'-6" using an 1/8th=1'-0" scale.
What is 1-3/16"
500
This is what needs to be modified if linetype pattern is not showing the line's pattern because the required line is too short.