Ground Operations
Ground operations that require a medical physical
Three areas of FOD Control
What is:
FOD Awareness Area
FOD Control Area
FOD Critical Area
Standard Toe Tag information has:
What is:
- Inspected by or inspected OK
- Aircraft tail number (last three digits)
30 minutes or longer you shall....
What is:
- Clean up work area (to include tools)
Storage of hardware in toolboxes is...
What Is:
- Not authorized
Vehicle speed allowances/restrictions
What is:
- 5 MPH within 50' of aircraft
- 10 MPH on taxiways
- 50 MPH under emergency conditions (more than 50' from aircraft)
- Walking speed inside facilities
FOD Control Areas include...
What is:
Dock Floors
TRIM Pad
Technical workstations
Parts Racks
Roped off area surrounding operational aircraft outside Bay 10
Parts placed on shelving shall have....
What is:
- Appropriate tag (toe or unserviceable)
- Protection from damage (padding/bubble wrap if stacked)
- Organized in an orderly manner
Consumable rules (issueing/turn-in)
What is:
- At a minimum - must be placed in a marked bag identifying type and quantity
- Upon completion, user must verify quantities and jointly with CTK check all items back in/disposed of
What is the dollar threshold to initiate a mishap report
What Is:
- $5,000
***Notification to GFR W/I 7 days***
***Site Manager needs to clear the quarantine"
All vehicles entering an operational area shall...
What Is:
- Vehicle comes to complete stop
- Inspect all tires and wheels for FOD, then roll vehicle forward to inspect the portion of the tire on the ground
- Walk around the vehicle inspecting for other potential FOD
The Aircraft becomes FOD Critical when....
What is: Upon entry into aircraft build-up phase
(Typical the day after the completion of the structural modification phase)
Tool inventories are conducted....
What Is:
- ALL tools accounted for at beginning and end of shift
- Before/after critical tasks (i.e. wing, boat tail, vert removal/installation, jacking, etc)
Handling of small parts and hardware
What is:
- Placed in a bag, attached to component
- Marked with: Tail #, quantity, component removed from
- Placed on shelf outside FOD Critical Zone
I finished my work...what is needed to sell it to QA
What Is:
- Signed off job in workbook
- T.O./ETAR Reference ready
- FOD cleaned up
****Physically get a TI and sell the job AT TIME OF COMPLETION not months later****
What is classified as Severe weather
What is:
- Sustained winds/gusts of 50 MPH or more for 1 hour or more
- Tornados or Hurricanes
- Severe T-Storms
Loose items and jewelry are permitted.....
What is:
FOD Awareness - Not restricted
FOD Control - Removed or secured, not permitted above the waist
FOD Critical - No loose items or jewelry permitted at anytime
What steps required for borrowing a tool
What Is:
- Complete Tool/Equipment Control Log
- Place form in each affected toolbox
Bench stock and hardware from aircraft kits shall...
What Is:
- Controlled by Team Leads
- Documented by use of YUCON-BHM-PR-01 Lot Label
What is required for using a TO?
What Is:
- 15 day stamp (addition 15 day extension is authorized)
- Printed drawings must be QC stamped and reviewed every 30 days
What are 3 situations you must notify the ARFF
What Is:
- A/C Servicing, A/C Fuel system maintenance, Spray Painting, application of power, Heat/sparking producing activities, engine/APU runs, Handling, loading explosives, 30 min prior to takeoff to 15 mins after takeoff, 15 minutes prior to landing to 10 minutes after landing, confined space entry
Applications where FO barriers are required
What is:
- All open lines, tubes and electrical connectors
I lost a tool....I shall....
What Is:
- Immediately notify supervisor/lead + initiate a search for the item
- If not found by end of shift initiate Lost Tool/Item Report
When are 244's reviewed
What Is:
- Before use inspection and initial 244
- Eye wash stations, fire extinguishers Weekly
What must be signed into FOD critical control areas
What Is:
- Tools required to do your job
- Tools not assigned to the dock you are working in