What is the perimeter of a rectangle with one 6 ft side and one 5 ft side?
22 ft
100
What is the area of a rectangle with one 6 ft side and one 5 ft side?
30 sq ft
100
How many yards in 36 inches?
1
100
This figure has two rays that cross to form four right angles.
Perpendicular lines
100
This angle has a measurement of more than 90 degrees.
Obtuse angle
200
What is the perimeter of a rectangle with one side 8 in and another side 9 in?
34 in
200
What is the area of a rectangle with one side 8 in and another side 9 in?
72 sq in
200
How many quarts in 3 gallons?
12
200
This figure has two rays that never intersect.
Parallel lines
200
This angle has a measurement of 180 degrees
Straight angle
300
What is the perimeter of a rectangle with one 12 m side and one 8 m side?
40 m
300
What is the area of a rectangle with one 12 m side and one 8 m side?
96 sq m
300
Put the following in order from greatest to least: 3 yards, 145 inches, 6 feet
145 inches, 3 yards, 6 feet
300
This figure has three sides, and each side is of different length.
Scalene triangle
300
A piece of square wood was equally cut diagonally from corner to corner. What is the angle measurement of both cut pieces?
45 degrees
400
What is the perimeter of a square with one 20 cm side?
80 cm
400
What is the area of a square with one 20 cm side?
400 sq cm
400
Mary is making two pitchers of lemonade. For each pitcher, she needs 2 quarts of water and 1 cup of lemon juice. How many liquid ounces does she need total?
144 fluid ounces
400
This figure has four sides of equal length and four right angles.
Square or rectangle
400
A clock's minute hand turned 40 minutes. How many degrees did it turn?
240 degrees
500
What is the perimeter of a square with one 67 mm side?
268 mm
500
What is the area of a square with one 67 mm side?
4,489 sq mm
500
A junk yard process about 15 tons of scrap metal per day. How many pounds does it process per day?
30,000 pounds
500
This figure has three sides with three equal angles and sides of equal length.
Equilateral triangle
500
A construction worker needed a piece of metal cut at 102 degree angle. He started with a rectangular piece and cut his angle. What is the type of angle of the piece he didn't use?