These common alarm panels now made by Kidde come in 2 zone, 5 zone, or 10 zone. They can be easily disabled by circuit with one button and have a quick resetting walktest feature.
Fireshield
These type of detectors operate by shorting out the circuit when they go into an alarm state
Conventional Detectors
This system will only activate if a detector and a sprinkler head burst.
Pre-action system
Taylor fire is a _____ level Notifier distributor
Platinum
Who founded Taylor Fire Protection?
Rick Taylor
This alarm panel has a button on the back of the door to reset the "watchdog"
Firenet or Firenet Plus
This type of detector senses rapidly increasing temperatures
Rate-of-rise heat detector
This sprinkler system is has no pressure in it's pipes in normal operation
Deluge
This program allows us to change logic equations.
Verifier Tools
Taylor Fire's Mission statement is....
Providing Peace of Mind
This alarm panel uses a collection of cards, one of which is the ZN-30.
Pyrotronics System 3
This part provides a flow of air through the detector enclosure due to a pressure differential.
Sampling tubes
This high pressured system vaporizes water
Water mist/ Marioff
This old program was once used to bring the AFP series programs to the Onyxworks series
Convertifier
What is Taylor Fire's Address
5887 E Blue Lupine Drive
Palmer, AK 99645
This Red alarm panel contains zone cards with a switch that moves the zone to either normal, walktest, or disable.
ESL-1500
This type of detector monitors for LEL
Gas Detectors
The amount of time a releasing zone is active is considered the _____ time
Soak
If I wanted to activate an output using any detectors in my equation, how would I start my logic equation?
Or
What year was Taylor Fire Protection founded?
2002
When installing an SFP-10ud this commonly forgotten output is specialized for synchronizing Booster panels.
And NEEDS A RESISTOR!
Remote Synchronization Output
This Notifier Addressable detector senses both heat and smoke.
FAPT-851 or FPTI-951
These 4 books are allowed to be in the special hazard level 2 test.
NFPA 12
NFPA 25
NFPA 72
NFPA 2001
If I wanted to activate an output only if all detectors in my equation are active, how would I start my logic equation?
And
How Many active accounts do we have with Emergency 24?
339 accounts