Maintenance and Testing Responsibilities
Maintenance of portable lighting includes this.
Replacing light bulbs as necessary
Fire and life safety programs bring the fire department together with this group.
The community
Class A foams are used to extinguish fires involving this type of fuel.
Ordinary Combustibles
When transferring Command, the fire officer receiving command must here.
On scene.
The correct order of incident priorities is this.
Life safety, incident stabilization, property conservation (LIP).
What should be done with hose that is found to be leaking during service testing.
Take it out of service.
How should firefighters operate when conducting residential fire and life safety surveys.
In teams of two or more.
This foam appliance is useful in blanketing operations.
Foam aeration nozzles
This term is defined as "an excavation, narrow in relation to its length, made below the surface of the earth".
Trench
Stones and concrete may lose small portions of their surface when heated, a condition called this.
Spalling.
After checking fluid levels, this is the next step in the inspection of power plants/generators.
Starting the power plant/generator without a load.
In order to build rapport with the community, how should preincident planning surveys be carried out.
As a scheduled, coordinated visit.
This type of sprinkler is typically used in dry systems and designed to deflect the spray of water downward in a hemispherical pattern.
Upright
In most jurisdictions, this position has the legal responsibility to determine the origin and cause of a fire, or delegate the responsibility to someone else.
Fire chief
At hazardous materials incidents, decontamination stations usually assembled here.
The warm zone.
When using a fire department pumper, where should the hose be connected on the apparatus?
On the side opposite the pump panel.
This standpipe system is designed to be used by fire suppression personnel trained in handling large hoselines.
Class I
Fast air moving in at the bottom of a door and smoke moving out the top indicates this.
An active structure fire.
This type of indicating control valve has a valve stem with the words OPEN or SHUT visible on the side of the housing.
Post Indicator Valve (PIV)
After exposure to Class A and Class B foams, gear should be washed at this interval.
After every use.
This most basic piece of equipment is necessary to service test a fire hose.
Hose-testing machine, portable pump, or fire department pumper
This type of smoke detection device detects particles and aerosols that are too small to be seen by the naked eye.
Ionization smoke detector
When dealing with smaller electrical fires, such as those in electronic or computer equipment, you should do this FIRST.
Isolate the power source and then extinguish the fire.
Aluminum melts around this temperature.
1,220° F (660° C)
When interacting with the public, in particular when presenting a fire and life safety message, how should the firefighter conduct themselves.
In a professional manner, with a positive attitude.