This can be used to prove a lack of appropriate action by the fire department
What is an incomplete fire report
Name of a tool used to find hidden fires in wall,ceilings,etc through heat imaging
What is a TIC (Thermal Imaging Camera)
A fire hydrant color coded orange flows this GPM
What is 500 - 999 GPM's
The L in lunar stands for
What is Location
Roof that is elevated in center with an angular slope to the edges
What is a pitched roof
The transfer of command should be included in what reports
What is status/progress reports
Three basic types of powered hydraulic tools used in rescue incidents
What is Spreaders, Shears(cutters), Extension Rams
This is the most common extinguishing agent cause of its cooling properties
What is Water
Common method used for a 2 person salvage cover deployment
What is a balloon toss/throw
Primary fire hazard in fire resistive construction
What is contents of the structure
These reports are made ten minutes into an incident and at 10-20 minute intervals thereafter until the incident is under control
What is Situational/progress reports
Type of ventilation that uses a nozzle and a fog pattern to vent a room
What is hydraulic ventilation
This created by water flowing through a hose and rubbing against the inside of the hose,losing pressure along the way
What is friction loss
Salvage work in the fire service consist of reducing these 3 things during and after a fire
fire,water and smoke damage
Type of hose roll that is the easiest to work with
What is straight roll
The term used for areas adjacent to a building
What is exposures
List in order of the coordinated search patterns for a multistory building
What is area immediately around fire,and rest of fire floor; area directly above the fire floor, and rest of that floor; then all higher level floors,from top floor down, to the areas below the fire floor
Appliance needed to combine two hose lines into one
What is a siamese
3 methods of interior attack
What is Direct, Indirect, Combination
Type of hydrant that has water inside them at street level and are usually installed in climates where freezing temperatures are not a concern
What are wet barrel hydrants
Structure members that are of noncombustible materials but may not have fire resistive protection
What is type II
The elements needed to produce quality firefighting mechanical foam include these
What is Air,Water, and Concentrate
Easiest load for preconnected attack lines is
What is a flat load
Method of separating materials to expose any hidden fires and extinguish
What is Overhaul
The point at which an ignition source comes into contact with a fuel supply
What is th Point of Origin