Chapter 4
Chapter 5
Chapter 6
Math and Forms
Random Fist Knowledge
100

Target Description, method of engagement, and method of Fire and Control

The third transmission in a call for fire

100

The observer's determination of the location of the burst, or the mean point of impact (MPI) of a group of bursts, with respect to the adjusting point as observed along the observer-target line. 

Spotting

100

How many transmission are there in an immediate smoke mission?

1
100

What is the equation used to determine Flash-to-Bang?

# of seconds x 350 = # meters

100

Max effective range of 120mm mortar?

7200 meters

200

Clears the net for the fire mission. Consists of type of mission, the size of element, and the method of target engagement

Warning Order

200
What is the Sequence of Subsequent Corrections?

Observer Target Direction.

Danger close and cancel danger close.

Trajectory. 

Method of fire. 

Distribution. 

Projectile. 

Fuze. 

Volume. 

Deviation. 

Range. 

Height of burst. 

Target Description. 

Mission type and method of control. 

Splash. 

Repeat.

200

The location on the ground where a projectile will impact if it were to follow an unguided ballistic path

ballistic impact point (BIP)

200

The Final Protective Fire is within how many meters of a friendly position?

200 to 400

200

Height of Burst Corrections are sent to the nearest _______

5 meters

300

What is the purpose of the target description in a call for fire?

so the FDC can determine the amount and type of ammunition to use

300

If the adjustment of fires moves the round outside the danger close distance, the observer transmits what?

Cancel Danger Close

300

Minefields established in conjunction with an attack using other munitions such as ______ or ______ may be either a planned minefield or target of opportunity minefield.

HE

DPICM

300

DA FORM 4655-R

Develop a Target List Worksheet

300

What does FASCAM stand for?

Family of Scatterable Mines

400
Loading and Firing as rapidly as possible, consistent with accuracy, within the prescribed rate of fire for the equipment

Continuous Fire

400
What are the 4 types of Adjustments Techniques?

Successive bracketing

Hasty Bracketing

One Round Adjustment

Creeping Fire

400

Provides illumination that is visible through night sights, but not to the naked eye.

INFRARED ILLUMINATION

400

What is the nomenclature for the Excalibur?

M982

400

What are the 3 types of desired effects on a target?

Destruction, Neutralization, and Suppression

500

What are the 5 Lines in a Rotary Wing 5-Line Request?

1. Observer Warning Order

2. Friendly Location and Mark

3. Target Location. 

4. Target Description an Mark

5. Remarks

500

The registration point should be accurately located withing ________, near the center of the zone of fire, semi-permanent, located on fairly level terrain if possible, and on common grid with the firing unit.

10 meters

500

What are the types of Smoke?

Obscuring smoke 

Screening smoke

Deception smoke 

Signaling smoke

500

What is the recommended length and width for planning an FPF using four 120mm mortar Tubes?

300x75m

500

How do you give adjustments to a AC-130?

Cardinal Directions

M
e
n
u