Flex Tracker
Zip
One
General
Dutch
100
This what you use to wake you up without waking up anyone in the house.
What is a silent alarm?
100
This tool is used to open and close the Fitbit Zip.
What is battery door tool
100
This emblem or figure will allow the user to know the activity levels within the last few hours.
What is activity flower?
100
The USB device used to sync all Fitbit Trackers using a computer.
What is a Dongle?
100
This is what Dutch stands for.
What is Device Upload Connection History?
200
This is used to fasten the Fitbit Flex wristband
What is Clasp?
200
The type of software used by this device.
What is firmware 5.86?
200
It registers a floor when it detects continuous motion combined with an elevation gain of about 10 feet.
What is altimeter?
200
It is a device that turns movement (acceleration) of a body into digital measurements (data) when attached to the body. All Fitbit trackers contain one of these.
What is an accelerometer?
200
Other than Wire ID and email, this number can also be used to search for a user's logs in Dutch.
What is Factory Serial No?
300
This is the type of display used to show your progress.
What is LED Display
300
This is used to troubleshoot the Zip tracker when submerged in water accidentally.
What is rice?
300
This step must be performed when a One's display is not turning on.
What is a restart?
300
This is what all Fitbit trackers use to sync either using a dongle or directly through a compatible smart phone. This must be enabled on compatible smart phones for a sync to occur.
What is Bluetooth 4.0 LE?
300
Errors that may cause issues with the trackers.
What is Asserts?
400
It can be submerged in water up to 10 Meters. Will hold up against sweat, splashes, rain, soapy water, and hand washing. (Feature)
What is waterproof?
400
This is the specific type of battery that is used with the Zip tracker.
What is 3 Volt CR2025?
400
After the display has cycled through each screen 5 times, this mode will end, and you will be in normal mode. In normal mode, the value and icon is displayed immediately after you press your tracker’s button for faster viewing.
What is beginner mode?
400
This is the rate of burned calories a body burns at rest. Fitbit uses these values combined with personal demographics to determine the overall burned calories for the day.
What is BMR (Basal Metabolic Rate)
400
Indicates the last time a tracker synced to the account. It is found under Device Info in Dutch.
What is Last Sync time?
500
Flex's four outermost LED lights will flash while the middle LED light will stay off. This light pattern tends to flash every 30-60 seconds. The customer cannot track his steps.
What is reboot loop
500
This causes the Fitbit Zip to reboot erratically and randomly. Often times the customer will loose steps and data. The time on his or her tracker will also be incorrect. Often the tracker will turn off and not respond when tapped.
What is a loose battery contact?
500
This is the specific name of the display type that the Fitbit One uses.
What is OLED display?
500
This is the hardware in the Flex and One which is activated during silent alarms. The Fitbit Zip doesn't have it. It is also activated on a Flex when you tap on it for 3-4 seconds rapidly.
What is vibrating motor?
500
This is the title of a section of Dutch in which one can see the sync information for a user's tracker.
What is Device pairing log?
M
e
n
u