Around the Shop
This part of the shop contains both precision measuring tools and hand tools such as dial calipers, rulers, hack saws, wrenches and hammers.
What is the tool crib
3/4 on a ruler is equivalent to how many thousandths?
What is .750
Name two functions of a live center on a lathe
What is to anchor/hold far end of part, and setting tool heights to center
A sharp edge on a workpiece
What is a Burr
What is a good speed to cut steel at on a engine lathe
What is 540 RPMs
This part of the shop contains various lengths of both bar and round stock. You may also find scrap material in this area to work on.
What is the material crib
Dial calipers are capable of making measurements in _____________ different ways.
What is 4
What two axis directions does the lathe move in?
What is x and z axis
A metal that contains Iron.
what is Ferrous Metal
how much spaghetti can you fit in a car
what is 1150 cooked boxes
This part of the shop contains metal cooling lubricants and cleaning products such as oil, coolant, and simple green.
What is yellow cabinet/flamable storage cabinet
These cards provide a fraction to decimal conversion chart along with drill and tap sizes for machining.
What are starrett cards
What part of the lathe does the chuck directly connect to?
What is the spindle
A metal that contains no Iron.
What is non Ferrous
Whats your favorite color?
What is purple
In the theory room there is a computer aided design program we use for making anything from 2D clock designs to 3D machined parts.
What is Mastercam
if a part is supposed to be 4.000 inches long and has a tolerance of +/- .005 thousands how small can the part be?
What is 3.995
What is a good speed to cut aluminum at on a engine lathe?
What is 800 RPM
To remove a sharp edge from a part usually with a file
What is Deburr
This artist is responsible for a hit song called "never gonna give you up"
Who is Rick Astley
Theres an emergency involving a student on a machine. How Would you kill the power to the whole shop?
What are the 4 ways you can measure using a dial caliper?
What are inside, outside, step, and depth
What is the difference between facing off material and turning material when working on a lathe.
What is facing off makes cuts on the front of the work piece (x axis) while turning produces cuts in the z axis from the side.
What is .500 as a fraction
what is 1/2
When is tick tock supposed to be banned?
What is the 19th of january