G-CODE
G-CODE
G-CODE
M-CODE
MISC
It's Alive!
OMG
100
A Rapid move G-Code
What is G0
100
A CW arc G-Code
What is G2
100
The command to call out the tool length offset
What is G43
100
The code to call for a tool change
What is M6
100
The code used when cutting stock at a predetermined rate
What is "F"
100
The "G32" Command
What is Thread Cutting
100
The command to that increases the RPM as the tool moves toward the center of the part.
What is "G96"
200
A point to point feed move G-Code
What is G1
200
A Home position move in incremental G-Code
What is G28
200
The G-Code to cancel a fixed cycle
What is G80
200
The code used to start the spindle rotation CW
What is M3
200
The code used to cutter rotation amount
What is "S"
200
Max spindle speed command
What is "G50"
200
The feed per minute command
what is "G98"
300
Absolute positioning G-Code
What is G90
300
The code used in peck drilling cycles
What is G83
300
The code to cancel cutter compensation
What is G40
300
A code that is used to end and rewind the program
What is M30
300
The rough facing/turning cycle command
What is "G71"
300
The finish facing/turning cycle command....
What is "G70"
300
The constant surface speed off command
What is "G97"
400
Work shift command G-Code
What is G54
400
A spot drill cycle G-Code
What is G81
400
The code to turn cutter compensation on "Left"
What is G41
400
A code used to stop the program
What is M0
400
Code used for arc center in "Y" axis
What is "J"
400
The O.D./I.D. grooving Cycle command
What is "G75" Command
400
G99 command
What is "Feed Per Revolution"
500
A CCW arc move G-Code
What is G3
500
A tapping cycle G-Code
What is G84
500
The code to turn cutter compensation on "Right"
What is G42
500
The code used to stop the program by which can be turned on and off
What is M1
500
A code used in drill cycles to determine peck amount
What is "Q"
500
TRIPLE JEOPARDY!!!!!!!!!
OPEN TO ALL PLAYERS.......
YOU HAVE 30 SECONDS... GO!
What is you are incorrect.....
500
Who? me?
What is.. what are you waiting for?
