Specification
inward side
Sunken side
Fracture that penetrates completely through the glass wall
Broken / Crack
line has depth and is greater than 50% across sealing surface
Line Over finish
Somewhat faint seam originating from the blank
Blank seams
incorrect bottle design mixed in shipment
Mixed ware
Sealing uneven
Wrapped Finish
High amount of residual stress visible only in polarized light
Annealing strain
Fracture of a small fragment out of an otherwise regular surface
Chipped Finish
Fine vertical lines on container
Brush Marks
String of glass extending across the inside of the container
Birdswing
Oval Body
OOR
vertical fracture that runs through the finish wall
Split Finish
fine surface fractures or shallow skin checks mainly on the sealing surface of the finish
Crizzle Finish
fine surface fractures
Crizzle Baffle Seam
Sharp projection of glass on the interior of the container
Spike
Tilt Container
Leaner
Seal Integrity is Compromised
Line over Finish
open mark on the inside surface of the finish
Plunger pull
Indentation at the neck
Pinched Neck
Incorrect glass color
Color
Tilt Finish
Bent Neck
finish is not fully formed and has a radius larger than specified
Unfilled Finish
Glass Fragment on the glass bottom
Rough Bottom
Relatively large seam originating from the mold
Heavy Mold Seam
Small glass particles stuck to the inside surface of the container
Internal fused/stuck Glass