SSA
This process is described in Section 5.5.1 of the SSA Service Manual
What is "How to modify date time settings?"
This function (RAS code) executes the cassette information clear function.
What is A002?
These 2 boards are found inside the power supply box
What is the Relay board and PRC board?
S9W0K9A00Y0
What is the Standby Switch Assy?
While waiting for the banknote removal at the Count Reject Pocket, during a count operation, this is the behavior of the Reject Pocket LEDs
What is White Flashing LED?
This button generates trace files after the date range has been set
What is Create bundle?
This function (RAS code) reads the memory information on the upper unit.
What is 3902?
In the case of brand new notes, this is the capacity of the Entrance Pocket
The number of shipping screws mounted on the left side of the lower chassis when installation is complete
What is 35?
DOUBLE JEOPARDY!
The package management (firmware update) process separates the installation process into these different stages.
What is Upload/Accept/Install?
DOUBLE JEOPARDY!
This driver (should) install itself on your laptop when connecting to the GLR, and is required to access SSA
What is the RNDIS Gadget Driver?
This function (RAS code) writes the device model number
What is 9E01?
DOUBLE JEOPARDY!
A Valid, but bad quality note would fall into this category when read by the BV
What is 4B?
S9W0L9K00Y0
What is the Cassette Key?
This Site is used to find/download machine/PRC/BV firmware
What is SoFi?
This is the IP address that your laptops ethernet must be on to connect to SSA
What is 203.0.113.X?
This function (RAS code) writes setting serial number capturing
What is 2B02?
this is the GLR-200 processing feed time
What is 8 notes per second?
Detects Metal foreign objects by the change in the magnetic field in the entrance area.
What is the Coin Detector?
The max count of a GLR-200 RSM
What is 680?
These can be used as dispense reject locations
What is Cassette 5U or ISM?
This is the RAS code needed to Sensor Adjust (auto adjust) Cassette 1
What is 60 00 50
Communicates with the other circuit boards, via USB to the Bill Validator
What is the UMC?
This optional part for the Exit Pocket comes with an additional LED
What is the Exit Shutter?
This is what GLR stands for
What is Global Longedge Recycler