LOTOTO
The acronym LOTOTO stands for what
Lock Out Tag Out Try Out
True or False: Facilities may allow employees to wear flexible, non-conductive rings designed for industrial environments such as Qalo brand rings.
True
The minimum height Graymont requires fall protection to be worn
4 feet above ground level or nearest floor
______ personnel shall never cross an arc flash boundary or limited approach boundary when work is underway on unguarded and energized electrical equipment.
Unqualified
This needs to be filled out prior to conducting hot work
Hot work permit/hot work risk assessment
Areas where lifting operations are to occur shall be identified with _________ tape and tagged, barricaded in a manner that works for the facility, or monitored by a dedicated attendant to prevent personnel from passing under or near a suspended load
Red Danger
At a minimum, how often do employees need an audiogram performed
Annually
Who do we sell our LKD to?
Omni Materials
True or False: Facilities may elect to waive the requirements for lifelines and harnesses in a confined space.
True: Only in circumstances where this equipment increases the overall risk of entry or would not contribute to the rescue of the entrant.
Can one competent employee remove another competent employee’s lock?
No
Personal locks shall only be removed by the person who applied them.
True or False
When Red Danger tape is in place, individuals shall only cross the barrier after they are aware of the hazards and after they have taken the necessary safeguards to reduce risk of experiencing injury or illness.
False- only individuals who may be working to mitigate risks and hazards and who are appropriately protected are permitted to cross the barrier and enter the work zone. All other individuals shall not enter the work zone without permission from person(s) in control of the taped area
Tie off anchor points must be able to hold a minimum of _____ lbs
5000lbs
Insulated hand tools must be visually inspected and conditions documented on an assessment form at what time interval
Annually
Area within our facility in which hot work can be conducted without a permit
All slings and rigging hardware are to be visually inspected ____ use and ____ use
Pre and Post
A TWA (8 hour) sound level of _____ dBA requires the employer to enroll miners into a hearing conservation program
85 dBA
In one of the most popular Dr. Seuss books, what won't Sam-I-Am eat?
Green eggs and ham
The three types of individuals listed on a Confined Space Permit
Entrant, Attendant, and Team Leader
_________ lockout may be used to control the number of personal locks required and to control complexity where there are multiple energy source control devices that need to be locked out.
Group
Why must stickers on a hard hat be ¾” from the rim of the hard hat?
It prevents the sticker from acting as a conductor between the inside and outside of the helmet.
A barrier erected on a roof to warn individuals that they are approaching an unprotected side or unprotected edge and which designates an area in which work may take place without the use of a standard railing, fall arrest systems is called a what?
Warning Line
A dangerous condition associated with the possible release of energy caused by an electric arc is called what?
ARC Flash Hazard
What is the Special Instructions code number in JDE work orders for Hot work precautions?
11
In lifting and rigging, wire ropes, chains, metal mesh, synthetic web, synthetic round and synthetic rope made into forms are all examples of what?
Slings
NRR stands for
Noise Reduction Rating
What were the original colors of the Green Bay Packers?
Bonus question for an extra 300 points:
In what year were the Packers football team established?
Blue and Gold.
Bonus answer: 1919
When sniffing a confined space prior to entrance, the atmospheric concentration of oxygen must be between _____ % and _____ %
19.5% and 23.5%
Are personal and system locks required to be standardized by color, shape, or size across Graymont?
No, personal and system locks are not required to be standardized by color, shape or size because there was little value in disposing of many locks to standardize across the company.
What Graymont standard states a person shall never walk under suspended loads
Lifting and Rigging standard
Personal fall protection systems shall be required when_____________.
There is a risk of falling.
When test instruments are used for the testing for the absence of voltage on conductors or circuit parts operating at _____ volts or more, the operation of the test instrument shall be verified before and after an absence of voltage test is performed.
50 volts
Appropriate _____ _______ shall be readily available in the immediate hot work area.
Fire Extinguishers
The crane operator shall respond to signals only from the appointed signaler. However, the operator shall obey the _____ signal at all times, no matter who gives it.
Stop
PEL stands for?
Permissible Exposure Level
When water is added to quicklime it causes this specific type of reaction.
Exothermic Reaction
A confined space is defined by these 3 criteria
1. Large enough to enter and perform work
2. Limited or restricted means for entry or exit
3. Not designated for continuous human occupancy
______ and _______ personnel shall be trained in accordance with the Training Matrix.
Competent and Affected
ANSI stands for what?
American National Standards Institute
Warning lines are only permitted on roofs with a slope between __ and __ degrees
0 and 15 degrees.
The approach limit at a distance from exposed live parts within which a person could receive a second degree burn if an electrical arc flash were to occur is called what?
Arc Flash Protection Boundary
What is our most common category/type of fire extinguisher around the plant?
ABC
Cranes and hoists shall not be:
A ringing in one's ear is a commonly known symptom of ________
Tinnitus
What is the max gross weight we can load to for a railcar to Evraz?
286,000 pounds.
When feasible, a mechanical retrieval device shall be set up when an entry is made vertically into a space that is _____ feet in depth or greater.
Five