DroneBuster
What is the Dronebuster Effective Range?
Unaided Line of Sight
What is the SMASH 2000L/3000 Fire Control Max Effective Range for Drones during the day?
20-200 Meters
TITAN is __________, providing _____ degrees of protection.
omnidirectional, 360
T/F: Dronebuster Block 3 & 3B: Both can jam only GPS & GLONASS Bands?
True
Smart Shooter 2000L/3000 Batteries will last for _________Wks. in standby mode?
6 weeks
Titan is an _____ sensor and _____ that delivers automated protection, preventing unwanted drones from entering airspace before becoming a threat while minimizing impact to other communications.
RF-based, effector
Newer drones have the capability of ________? within the same RF Band or jump between one RF Band to another (i.e., jump from 2.4GHz to 5.5Ghz).
frequency hopping
Prior to performing any maintenance or test on the SMASH what mustyou do?
Clear the weapon
The TITAN is a small, light and portable unit that weights how many pounds?
20 lbs
Drone-buster 4 PNT has a _____? Degree Cone and Can interdict “Dark Drones” flying exclusively on waypoint control.
60
What are the 3 Selectable Power Modes of Operations on the Smart Shooter?
off, Day Mode and Night mode
High capacity equally-charged batteries can provide up to _____ hours of passive detection or _____ hours with countermeasures, varying with actual duty cycle.
5, 2
The HERP Safety Area for the Dronebuster is ___m in front and ____-degrees to the right side and ____-degrees to the left side
5m, 15 right and 15 left
While in SLEEP MODE, how long does it take the SMASH 2000L to wake and achieve Full Operational Mode after pressing the lock button to wake up?
10 seconds.
Multiple TITANS should be placed how far apart?
Minimum Six (6) inches apart
Is the Dronebuster a kinetic or non-kinetic system?
non-kinetic.
What are the PUSH BUTTONS utilized for?
Menu access and navigation, maintenance, zeroing, and reticle brightness
What Extended Frequency does the TITAN cover?
433/868/915 MHz and 1.2 GHz
T/F: Some Fix-Wing Drones do not have any Lost Link Protocols, these drones will fall out of the sky when they are being jammed, or may head straight towards the Jamming source, in order to drop/hit that location as if it’s the target.
True
While in STANDBY MODE, how long does it take the SMASH 2000L to wake and achieve Full Operational Mode after pressing the lock button to wake up?
3 seconds.
What Standard Frequency does the TITAN cover?
2.4-5.8 GHz, WiFi and GPS
For Fixed wings drones, what are the most common lost link behaviors for drones?
Fall to the ground or may head straight towards the Jamming source, in order to drop/hit that location as if it’s the target.
How can you tell if you're in-Drone Mode when looking through the see Through Display?
You will see the drone icon in the upper right-hand corner.
________________ between the drone and system enables optimum performance; trees, buildings, and elevated terrain block LOS and impact performance.
Clear line-of-sight (LOS)
What is the purpose of the Dronebuster?
To Disrupt drone control & communications (C2) and navigation capabilities or simulate GNSS navigation signals.
What are the three firing modes for the Smart shooter?
Zeroing, Ground Targets, and Drone Targets
What does ISM-H Radio Frequencies stand for?
Industrial, Scientific, and Medical (ISM) and HAM frequencies coverage
Smart Shooter has two firing methods?
Manual and Assisted.
When the Disrupt Method switch is set to C2 high, what will the dronebuster do, when it engages a drone.
It will disrupt the command and control of the drone with full available power only.
You must ensure that the Smart Shooter is in what mode to engage drones?
Drone Mode (Anti-Drone Mode)
What is the battery Endurance of the dronebuster?
60 minutes jamming or SNA, 12 hours in detection, 18 hours in standby.
How does a Dronebuster attempt to separate drone signals from other devices, like Bluetooth or WiFi signals.
It doesn’t separate the signals.
Can a Dronebuster system engage multiple targets at one time?
Yes. By using a sweeping method of engagement.
What does it mean when the RF detection LEDs show a constant off-yellow-off-yellow pattern?
The system is too hot.