1-5
___________, although the most common hand tool, are the most misused.
Screwdrivers
Hammers
Wrenches
Ratchets
Screwdriver
If the handles on pliers are plastic, they are shock proof. True or False?
False
Which of the following completely surrounds the nut or bolt head?
Adjustable Wrench
Box-end Wrench
Open-end Wrench
Box-end Wrench
Which is stronger, 6 point or 12 point?
6 Point
12 Point
6 Point
Which of the following measurement tools is not considered a precision instrument?
Small Hole Gauge
Telescoping Tape
Steel Tape
Steel Tape
Screwdrivers are measured by the length of their__________.
Shaft
Blade
Handle
Blade
Which of the following is a tool used to mark the location of a hole which is going to be drilled?
Starter Punch
Aligning Punch
Center Punch
Center Punch
By what size increments does a SAE open-end wrench increase?
1/32nd of an Inch
1/16th of an Inch
1/8th of an Inch
1/16th of an Inch
Where is a neoprene (rubber) insert located?
On an Extension Bar
In a Rachet Adapter
In a Spark Plug Socket
In a spark plug socket
A combination square ______________.
Sizes copper or nonferrous wire
Determines number of threads per inch
Determines if something is square or at 90 degrees or 45 degrees
Determines if something is square or at 90 degrees or 45 degrees
______ _________, such as a hex driver, are considered a type of screwdriver.
Nut Driver
Phillips Driver
Bit Driver
Nut Driver
Most chisels are made of _______________.
Plastic
High Carbon Steel
Aluminum
High Carbon Steel
Which of the following is NOT a type of torque wrench?
Square Drive
Torsion Bar
Click-type
Square drive
Gasket and carbon scrapers are used to scrape off which of the following from machine parts?
Oil
Carbon
Zinc
Carbon
A feeler gauge___________.
Determines the clearance between parts
Sizes copper or nonferrous wire
Determines if something is square or at a 90 or 45 degree angle
Determines the clearance between parts
The most common hammer is used by mechanics is the _____ ______.
Ball Peen
Plastic Tip
Mechanics' Hand
Ball Peen
A diamond point chisel is used for cutting__________.
Narrow Grooves
Semi-circular Grooves
Big Grooves
Big Grooves
Which of the following is an advantage of a ratchet?
Speed
Metric and Standard Ratchets are Interchangeable
Good Reach
Speed
How are countersinks sized?
According to Diameter
According to Height
According to Weight
Diameter
Select the correct list below based on lightest to heaviest.
mini sledge, ball peen, rubber mallet, claw hammer, sledge hammer
rubber mallet, claw hammer, ball peen, mini sledge, sledge hammer
ball peen, rubber mallet, claw hammer, mini sledge, sledge hammer
ball peen, rubber mallet, claw hammer, mini sledge, sledge hammer
Tips on a plastic hammer are ______________.
Permanent
Replaceable
Reusable
Replaceable
When using chisels, you should always _______________________.
Wear Eye Protection
Work Outside
Check the Angle of the Blade
Wear Eye Protection
Criteria for identifying sockets include which of the following?
Size of Drive
All of the Choices
Size of Nut or Bolt
Length of Socket
All of the Choices
Types of taps include
All of the Choices
Bottoming Tap
Taper Tap
Plug Tap
All of the Choices
How do you reach a hard to reach bolt or nut when using a ratchet?
Extension
Larger ratcher
Breaker bar
Extension