Shop Safety
What do you always put on when you start working in the shop?
Safety Glasses
What is the safety zone around the machine called when you are operating it?
The slap zone
What is PPE
Personal Protective Equipment
What is the long line in the center between 0 and 1 inch
1/2 inch
What is 1/4+1/4
1/2 (the correct answer has to be simplified)
How many and where are the first aid kits in the shop?
There are two first aid kits in the shop. One is located next to the main door and the other is above the safety glasses.
When using the band saw how high should the guard be above the material?
1/4"
Name a type of PPE for protecting your lungs
Face mask or respirator (either answer is fine)
What is the largest line between 0 and 1/2"
1/4"
What is 3/8+1/8? (Simplify your answer)
1/2"
When can you take off your safety glasses?
1 minute before the bell
What is the least amount of people that it takes to run the planer?
At least 2 people
Name a type of PPE for protecting your hands when handling rough wood. (not when operating equipment)
gloves
What is the line centered between 0 and 1/4"
1/8"
What is 1/4+3/8
5/8"
If you or someone else gets hurt what do you do?
Tell the teacher immediately!
What else needs to be running when operating the planer
The vacuum or the ventilation system (either answer is fine)
Name a type of PPE for protecting your eyes
safety glasses
What is the line between 0 and 1/8"
1/16"
Crosby is buying 1x4's to build his mom a raised garden. If Crosby needs 8- 36" boards and they come in 8 foot lengths from Home Depot how many boards should he buy?
4 boards
Where are the dust pans located?
In the tool room (if you didn't know this you do now and can use them next week)
How do you hold a project on the drill press?
With clamps or a fixture plate
Name a type of PPE for protecting your head
Safety Hat (also used as a safety reminder in our class)
What is the line centered between 5/8" and 3/4"
11/16"
If a project is 5" long how many projects can you get out of a 8 ft board USING THE MITER SAW?
18 projects (96 / 5.125 (remember the saw cut)= 18.73)