The weight of the engine block is placed where?
What is the front?
The common name/abbreviation for the material used for plumbing.
What is PVC?
The other name for an outlet.
What is receptacle?
Between 12 and 14, the small gauge wire.
What is 14?
What did we do first for yearly maintenance on a lawnmower?
Drain the oil.
The tool used to remove the lug nuts on a tire.
What is a tire iron/lug wrench?
GFCI stands for
What is ground fault circuit interrupt.
The two common gauge wires for residential (your house) outlets.
What are 12 and 14?
The first cable you connect to jump start a car.
What is red to the dead vehicles battery.
When cutting sheet rock, how is the first cut done?
Very Very lightly.
The proper ratio of coolant to distilled water for an engine.
What is 50:50?
What make concrete stronger?
What is rebar?
The "normal" amperage of the circuits in the panel.
What is 20?
The temperature recommended to set your water heater temp.
What is 130 F?
Why don't we use a short socket wrench to loosen and tighten the lawnmower blade?
Safer, it could slip off and slam your hand into the sharp blade!
PSI when referring to tires stands for.
What is pounds per square inch?
The valve controlling gas flow to your water heater is in the direction when it's closed.
What is perpendicular?
In electrical terms NEC stands for
What is national electric code?
What is the first step in checking the oil on your car?
What is let car cool down...or remove dip stick and clean it?
Normally what color is the screw that the black wire is attached to in an electrical outlet?
Brass.
The first step in changing the tire on a car...that is in a safe and level place.
What is loosen the lug nuts?
The NEC has a code for ground up or ground down.

What is false?
What is the most important safety rule?
To wear safety glasses!!!!
In terms of automotives RPM's stands for.
What is Rotations Per Minute?
Does the white wire go to the long slot or the short slot side of the receptacle?
Long.