HPC Rules and Regulations
Is our work authorization at IPL-CUB
What is a Safe Work Permit?
The "first" on and "last" off when applying safety grounds
What is the ground leg?
This "ยต" symbol represents
What is Micro?
Relationship ratio between phase to phase and phase to neutral
What is a "1.73" or "root 3"?
A tool we use to help with identifying hazards?
What is FLHA?
This is CUB's primary muster point.
What is Muster point 7?
Our shift permit number
What is "11913"?
This ANSI number represents "ac circuit breaker"
What is 52?
On a air circuit breaker, these "Make" before the main contacts on closing and "break" after the main contacts on opening
What is Arcing Contacts?
As per NETA, CT secondary insulation resistance test voltage level
What is 1,000 Vdc?
What is your ID Badge?
The recommended temperature at which to install winter tires
What is 7 degrees Celsius?
We use this equipment to convert DC to AC.
What is a inverter?
The amount of secondary current flowing with 500 amps primary and a CT having 1000:5 ratio
What is 2.5 amps?
NETA's torque value of 1/2", grade 5 bolt
What is 48 ft/lbs?
Is the number to call at IPL in the event of an emergency
What is 587-456-3540?
Will also accept channel 1 on radio
The voltage level of class 3 electrical safety gloves is
What is 26500 volts?
This ANSI number represents "liquid temperature".
What is 26?
This law states that the current flowing into a junction must be equal to the current flowing out of it.
What is Kirchhoff's Current Law
Is the third prong on a extenstion chord or tool
What is the ground?
This is the speed that should not be exceeded when driving on HPC work site.
What is 15KM/hr?
Must be completed before making contact with any electrical circuit
What is test before touch?
In a 3-phase system, each phase is separated by ______ degrees with respect to other phases.
What is 120 degrees?
The best IPL safety representative
Who is Greg or Dan?
This is the color of pen required to "delete" on red lines drawings at HPC.
What is Blue?
IPL HPC is located in _________ county
What is Strathcona?
Measures the incident energy that results in 50% probability of a 2nd degree burn
What is ATPV?
Arc Thermal Performance Value
This ANSI number represents "Lock-out".
What is 86?
This prevents the close coil from being energized more than once, or continuously
What is Anti-Pump Relay?
32 degrees Fahrenheit is equal to ___ Celsius
What is 0 degrees?