AEC Potluck
Fun Stuff
This & That
Imaging 101
Spark it Up
100

Describe how AEC works

What is radiation is transmitted through the patient and converted into an electrical signal, terminating the exposure time

100

The purpose of the mAs readout

What is reports the actual mAs used for an exposure, can make exposure adjustments by switching to manual technique

100

Difference between additive and destructive pathological conditions

What is additive has increased thickness, mass, density and atomic number

Destructive has more air, reduced tissue mass, decreased density and decreased attenuation

100

If backup time is controlled automatically, at or above 50 kVp, backup timers terminate at a maximum of _______ mAs.

What is 600 mAs?

100

The quality control test of the AEC device to see that exposures for a given set of factors and selected detector result in mR readings within 5% is called:

reproducibility

200

The two types of radiation detectors used in AEC systems

What are phototimers and ionization chambers

200

Two types of exposure technique charts

What are:

Variable kVp - Fixed mAs 

Fixed kVp - Variable mAs

200

AEC can also be called this

What is phototiming?

200
The purpose of backup mAs is (2 things):
What are protect the patient from receiving unnecessary exposure and protects the x-ray tube from reaching or exceeding its heat-loading capacity
200
Device that is used to measure part thickness

What is a caliper?

300

The level at which the backup timer should be set

What is 150-200% of the expected exposure time

300

Four major types of body habitus

What are hypersthenic, sthenic, hyposthenic asthenic
300

Define MRT

What is minimal response time?

300

The common increment of density control listed on the control panel (-1, +1, +2), according to the textbook

What is 25%

300

The baseline kVp is increased by 2 for every 1-cm increase in part thickness is what type of chart?

What is Variable kVp - Fixed mAs chart?

400

APR

What is anatomically programmed technique

400

Factors that can affect IR exposure

What are patient thickness, pathologic conditions, contrast media, foreign objects, pockets of gas, tissue composition

400

Refers to the shortest exposure time the system can produce

What is MRT? (minimum response time)

400

AEC controls the amount of radiation reaching the IR by controlling the_________.

What is time of exposure?

400

AEC device that is an entrance-type device because the detectors are positioned in front of the IR

What is ionization chamber?

500

The function of an APR system

What is a system of preprogrammed exposure technique settings that is organized by position and examination and set through the control panel of the radiographic unit

500

The difference between positive and negative contrast media

negative is more radiolucent than surrounding tissue

positive is more opaque than surrounding tissue

500
The most common radiographer error when using AEC is:

What is incorrect detector selection or incorrect centering of body part on appropriate detector

500

Device(s) that convert(s) light energy to an electrical signal

What are photodiode and photomultiplier tube?

500

TRUE or FALSE.  A high kVp decreases the exposure and reduces the overall radiation exposure to the patient.

What is true?
M
e
n
u