Random
? may be adjacent to a station, below an enclosed or covering structure, or a covered entry to a yard and not having any separation between tracks.
What is Built-over tunnels?
A roadway worker who is qualified to establish on-track safety for roadway work groups, and lone workers qualified to establish on-track safety for themselves.
Who is the RWIC?
A 50/50 duty cycle is the?
What is Optimum Condition
This weeks IMCS safety focus.
What is Heat Stress Awareness
The minimum # of days of railroad service an employee must have to be assigned the duties of a watchmen?
What is 90 days (RWP rule 349 section 8)
A specific location that an affected roadway worker must occupy upon receiving a watchman’s warning of approaching movement(s)
What is the pre-determined place of safety?
A current limiting fuse should be used where a fast response is desired and will interrupt a short circuit before?
What is can build to it full value.
BONUS QUESTION
How must we Secure the Right of Way?
By making sure to close and lock the gates when entering and exiting the access points to the right of way (tracks)
What rule states that employees must review and understand the Safety Instruction for each day, as indicated by the applicable Department Safety Calendar?
What is Amendment Safety Rule 1.4
What are the three Train Approach Warning Signals?
What is Warning, Verify, & Resume Work.
Each conductor is to be identified in both directions prior to?
What is splicing and shall be Megged in its entirely after conductor splice is complete.
If a RWIC allows 3 other gang to come and work into their working limits how many Supplemental Shunting Devices (SSD) are needed?
What is 4 for each gang?
The safety rule states: Burning of any kind, such as trash, ties, etc., for warming is prohibited?
What is safety rule # 11.9
A segment of track with definite boundaries established in accordance with this manual upon which trains, engines and on-track equipment may move only as authorized by the roadway worker having control over that defined segment of track.
What are working limits?
Crossing-bonding is necessary to provided?
What is a low impedance path for traction return current back to the nearest substation or source of traction power.
The rule # that states: While performing operations that require a face shield or welding shield, safety glasses or goggles must also be worn?
What is Rule # 5.9 (Safety Rule Book)