Identify the minimum weight that an anchor must hold to be used for rigging.
What is 5000LBS or greater.
100
Corrosion of piping, pressure vessels and structural components resulting from water trapped under insulation or fireproofing.
What is Corrosion Under Insulation (CUI).
100
_______ are locations where chemicals or process additives are introduced into a process stream.
What are Injection Points
100
API 570 covers inspection, rating, repair, and ___________ procedures for metallic and fiberglass reinforced plastic (FRP) piping systems and their associated pressure relieving devices that have been placed in service.
What is Alteration
100
At what height and above are employees not permitted to walk on pipe?
What is six (6) feet.
200
Identify two weather factors (windspeed, temperature, or wind chill factor) at which rope access is considered hazardous.
What is 30MPH, -20 degrees F, or 10 Min. Frostbite zone.
200
Accelerated mechanical removal of surface material as a result of relative movement between, or impact from solids, liquids, vapor or any combination thereof.
What is Erosion/Erosion - Corrosion.
200
A section of piping encompassed by flanges or other connecting fittings such as unions is called?
What is a spool.
200
What is the recommended Maximum Inspection Interval for a Class 1 circuit?
What is five (5) years.
200
When initiating a High Consequence Area worksheet (Slugging Line Form), what conditions allow an employee to work without taking additional precautionary measures?
What are;
- Employee can work without exposure to the hazard
- Work area is between pipelines that are more then (6) feet apart
- Work area is within 100 feet of a permanent anchor
- Work area is within 100 feet of a cased pipeline crossing
- Pipelines in work area are out of service
300
Essential climbing element identifying how to safely move a casualty from structure to a place where personnel can assume care and transport to a hospital.
What is The Rescue Plan
300
Corrosion of carbon steel and other alloys resulting from their reaction with sulfur compounds in high temperature environments.
What is Sulfidation.
300
Components of a piping system that normally have no significant flow?
What are deadlegs.
300
What is optimum range for CUI on carbon and low allow steels?
What is between 10 degrees F and 350 degrees F.
300
Permit to Work, Working at Heights, Management of Change are some of the ___________?
What are Eight Golden Rules.
400
System operated by an individual, stationed at a fixed anchor, designed to arrest the fall of a worker who is attached to the end of the rope.
What is Direct Belay.
400
Form of corrosion that can occur at the junction of dissimilar metals when they are joined together in a suitable electrolyte, such as a moist or aqueous environment, or soils containing moisture.
What is Galvanic Corrosion.
400
A documented management system for review and approval of changes in process or piping systems prior to implementation of the change.
What is Management of Change (MOC).
400
API ___ provides guidelines for conduction a risk-based-assessment.
What is API 580.
400
What is the maximum speed for use of Cruise Control while driving on the Slope.
What is None – the use of Cruise Control is not allowed for Slope.