Dimensioning
_____ define the size and location of the features of an object and give the overall size of the object.
Dimensions
The architect's scale allows the architect or drafter to prepare a drawing that is in _____ to the actual size of a structure.
Proportion
How do you show the materials used on a floor plan?
Material symbols
What are the three main zones of a city?
Industrial, residential, and commercial.
Unidirectional dimensioning are placed horizontally from the bottom of the drawing whereas aligned are placed ____ to the dimension line.
Parallel
On the architect's scale, 5 edges have two scales. For example, 3/4 scale is paired with the 3/8 scale. One of the pairs is always _____ as large as the other.
Twice
The ____ and ____ of kitchen cabinets, bathrooms vanities, fixtures, and appliances must be indicated on the floor plan.
Location and size
Which of the following is an example of an industrial zone building?
A)House
B)Grocery Store
C)Neither
C)Neither
Dual dimensioning was the first method devised to dimension engineering drawings with both ___ and ____ units.
inch and metric
On the 1/4 scale every 1/4" on the drawing equals 1' on the full sized structure. This means that 1" on the drawing is equal to ____.
4 feet
Residential floor plans are usually drawn to a scale of 1/4"=___.
1'0"
A power plant would be found in what zone?
A)Residential
B)Commercial
C)Industrial
C)Industrial
The dimension line is a ______.
Thin black line
What are the 5 paired scales?
3/32 and 3/16; 1/8 and 1/4; 3/8 and 3/4; 1/2 and 1; 1 1/2 and 3.
Which of the following should not be included on a title block:
A)Sheet number
B)Scale
C)Materials used
C) Materials used
A fast food chain is typically found in what zone of a city?
A)Commercial
B)Industrial
C)Residential
A)Commercial
The dimension line should be placed at least ___ inches from the object. Spacing between dimensions should be at least ___inches.
3/8 and 1/4
To layout a line 12 1/2' long on the 1/4 scale, you would begin at the 12 and go __ divisions past the zero mark. This represents 12'6".
six
Dimensions on floor plans must follow the proper guidelines;therefore, the dimensioning layer must be set up with the correct ____ and thickness.
A)Scale
B)Line type
C)Title
B) Line type
City _____ is defined as the measurements of a system of streets with multiple routes and connections serving the same origins and destinations.
Connectivity