Random Mix
T/F: It is safe to make any adjustments to the saw while it is plugged in a power source.
False
If the cutoff piece of stock is unsupported, caution must be used so that when it falls, the stock does not cause ______________.
Injury, damage, hurt
When using a power tool, you should always wear ________________ glasses.
Safety
Always ________________ a power tool when changing blades or making adjustments.
Unplug, disconnect
T/F: Machine guards can be removed if they are in the way.
False
What is the actual size of a 2" x 12" ?
1.5" x 11.25"
T/F: You should check the blade for the proper cutting application before operating the saw.
True
If you hear a decrease in the RPM of the saw motor while making a cut, you should prepare for a possible __________________.
Kickback
A reciprocating saw blade should be installed on the frame with the teeth pointing ____________ the handle.
Away from
The blade on the portable circular saw should be aligned on which side of the line when making a cut?
Waste/scrap side
The decimal equivalent of the fraction 7/8" is _____.
0.875"
What is the actual size of a 2" x 4"?
1.5" x 3.5"
For safety when using a portable circular saw, depth of cut should be adjusted to the thickness of the stock, plus _______.
1/4"
Reduce 2/8" to it's lowest term.
1/4"
Reduce 14/16" to it's lowest term.
7/8"
Place the saw on the stock to be cut with the blade _____________ the stock and lined up with the cut line on the stock, before the power is turned on.
OFF
Convert 7/8 to 16th's of a inch.
14/16"
DAILY DOUBLE!
List the correct order of the machines used to square a board.
Jointer, Planer, Table Saw, Miter Saw
What is the actual size of a 1" x 6" ?
3/4" x 5.5"
What is the actual size of a 1" x 8" ?
3/4" x 7.25"