PIT & Pedestrians
They steer from the rear, which creates tail swing
What is a powered industrial truck (PIT)
Must prevent contact, must be secure, must allow for safe lubrication and must not create a new hazard,
What is a machine guard
This person or a qualified designee must be contacted if you must be in front of a shutter for a short period of time so the shutter can be closed and verified.
What is the Radiation Safety Officer (RSO)
Hydrogen sulfide smells like rotten eggs at low levels, but cannot be detected at by smell at higher concentrations that's why ______ are so vital.
What are H2S monitors
The lock color used on chemical unloading valves.
What is yellow
Any person employee, visitor, contractor, ect traveling on foot.
What is a pedestrian
This type of tool has a Top clearance that should not exceed 1/4 inch.
What is a bench grinder
Prior to line breaking or vessel entry that involves radiation source holders the shutter must be locked, closed and ______ ?
What is tagged.
One of the best known insulators to man. Only trained and licensed employees can remove this material.
What is Asbestos.
Located in areas where there is potential for chemical burns to the eyes or the skin.
What are eyewash/shower stations
PIT operators view could be obstructed by this part of the PIT.
What is the mast,
This type guard usually connected to a mechanism that will cut off power automatically.
What is an interlocking guard.
Beta gauges, density gauges, statis bars these are examples of this type radiation.
What is Ionizing Radiation
Watering dust to keep it out of the air, proper PPE, vacuum, local exhaust ventilation.
What is controlling silica dust exposure
Security, The driver and the designated IP employees has important roles in this process.
What is chemical unloading
Proximity Detection system that was developed to address collison events between PITs and pedestrians
What is HIT-NOT
This form has to be filled out if equipment has to be operated without proper guard
What is a temporary guarding form
Ultraviolet light, infrared, microwave and radio frequency are examples of this type radiation.
What is non-ionizing radiation.
It's the only process in the mill that requires specialized PSM training to enter the area
What is the turpentine system area
Once the driver has reached the chemical unloading station, this trained person will verify that the driver is at the correct station.
What is a trained IP employee
At 25ft. both the pedestrian and PIT operator are alerted that the pedestrian is in imminent danger. what is this zone.
What is danger zone?
Pinch and nip points, rotating equipment and belt transfer are all associated with this type of hazards
What is moving equipment
Three factors that affect radiation exposure
What is time, distance and shielding
Processes involving chemicals listed on the OSHA standard that exceed the specified threshold quantities, flammable liquids or gases (with exceptions) that are stored in quantities of 10,000 pounds or more.
What is Process Safety Management
This product has a designated storage area, maintained in the upright position with protective cap securely in place.
What are compressed gas cylinders