What is the minimum weight rating for an anchor point?
5000 lbs for non-engineered and 3000 lbs for engineered anchor points.
How often does BSEE require 14C level devices to be tested?
Monthly not to exceed 42 days.
What is the Shell Crane Standard
OPS 0055
Who is authorized to reset a tripped motor on the facility?
AEP 2 or anyone who has been blessed as an Electrically trained operator by the SAEP. ETO has one chance to reset then it requires AEP 2 or higher to investigate.
How long are we required to keep records for annual valve lubrication. UFS file 215
24 months
When working at heights at what distance from the leading edge are we required to wear a PFD with our harness?
within 6'
When cutting a range chart was is the acceptable amount of days between a high and low on the same chart?
30 Days
Name 2 criteria to use a synthetic sling?
Documented in JSA, Needs to be put in lift plan, Made of continuous fiber-type construction, Have extra UV protection, Stored out of sunlight, Know the working load, Proper certification, Know the different configuration loads
Who on the facility is authorized to start 480 V+ motors associated with pumps and compressors etc?
Anyone deemed as an electrically trained operator (ETO) by the SAEP. Training required annually.
Safe Work Plans - How long are we required to keep these on site. UFS file 313
30 days on sight, then shipped to SRTCC for scanning. Off sight has to maintain records for 24 months.
How often are you supposed to inspect your fall arrest equipment?
Pre-use inspection before every use.
How often does BSEE require 14C pressure devices using a transmitter to be tested?
Quarterly
What should be done with the crane prior to starting operations?
Pre-Use inspection, JSA and permits signed.
Before energizing any electrical temporary equipment what must be put in place?
Proper grounding to prevent injury to personnel and to prevent any sparks from generating in a classified atmosphere.
Hazardous waste logs. UFS file 410 what is our retention time.
Current year plus 20 years.
What is the fall prevention standard.
HSE 0044
What does the acronym BSEE stand for?
Bureau of Safety and Environmental Enforcement
Who should be giving signals to the crane operator?
DSP only unless emergency all stop then anyone can give the signal.
Who is allowed to change a light bulb on a Shell facility?
Only technicians with an electrical rating.
UFS 520 Life boat/capsule - certifications. How long do we keep them.
Latest plus the previous certification
Name 2 of the 7 requirements for fall arrest systems?
Fall arrest systems must: · meet ANSI Z359 requirements, · be constructed and used in such a way that the person’s fall is arrested with maximum free fall of 6' (ideally 1'), · provide a maximum limit arresting force of 1,800 lb. with full body harness, · utilize self-locking, double-action snap hooks or triple-action, captive eye (pinned or permanent) carabineers · be rigged to prevent contact with any lower surface or adjacent structures, · be fitted with suspension trauma prevention kit, and · be removed from service 5 years after manufacture date if constructed of a synthetic web material (this Includes harnesses, lanyards, beam straps, SRL lines, etc.).
How often is a sub-sea wells SCSSV required to be tested?
semi-annual not to exceed 6 months.
What is considered a designated lift area?
Area blessed by the TA's. On Stones the starboard and port laydown are the main designated lift areas.
What is more dangerous Voltage or Current?
Current. If Current goes across the heart it only takes between 100 to 200 mA and you can feel an electrical shock at 1 mA. When you hold a 9V battery to your tounge a total of 1 to 2 mA flows between the terminals. Anything larger than a 9V could be dangerous.
UFS 534 Crane maintenance records. How long do we keep them?
Active = 48 months on sight.
Storage = 5 years (send to iron mountain)