Hand Tools
They are responsible for safe tools on a job site?
Who would be the employer
For safe operation , electrically powered tools shall have either of these two safety requirements
What are:
- Double insulated
Or
- Grounded
This tool is most frequently the source of laceration type injuries than and other hand tool.
What is a knife
The OSHA standard covering hand and power tools in the construction industry
What CFR 1926 Subpart I
Which of the following tools is the least dangerous
1 - pneumatic power tools
2 - a belt sander
3 - a gas powered chain saw
What is, any power tool can be equally dangerous if used improperly
Wooden handles of tools should be free of this hazard?
What are splinters and cracks
Hoisting or lowering tools shall not be permitted using this
What is by the power cord for the tool
The area on a machine where work is actually performed upon the material processed is called the _____________
Point of Operation
Who was the president that signed the OSH act into law
Who is President Nixon
On all fixed power driven wood working tools, this must be provided
What is a disconnect switch that can be either locked or tagged in the off position
Wrenches, including pipe wrenches and sockets should not be used when this happens
When the jaws are sprung to the point that slippage occurs
Compressed air should not for cleaning purposes except where the pressure is reduced to this
What is 30 psi
If a powder-actuated tool misfires, the user must hold the tool in the operating position for ____________ before trying to fire it again.
What is at least 30 seconds
The year the OSH Act was signed into law
What is 1970
What standard defines the requirement for safety glasses
What is ANSI Z 87.1
Impact tools , such as drift pins , wedges and chisels , shall be kept free of this
What are mushroomed heads
What is the minimum time allotment for power tool training
What is 30 minutes
This should be done with a hand tool that has a broken handle?
Tag it as unsafe and replace or repair it.
Trainers cannot serve this while providing training activities
What is alcohol
This is the primary function of the retractable lower blade guard on a portable circular saw
What is to cover the exposed teeth of the blade while the saw is not actively cutting into material
Employers should not issue or permit this
What is the use of unsafe hand tools
On a jack, this shall be legibly marked on the tool
What is the manufactures rated capacity
The minimum Personal Protective Equipment (PPE) combination required when operating a portable abrasive wheel bench or angle grinder?
What are appropriate eye protection (safety glasses or goggles) and full face shield
OSHA defines this as an offering of either 10 or 30 Outreach course
What is "a class".
This is the safest method for getting heavy hand or power tools up to your work position while working at an elevated height on an extension ladder
What is a hoist, bucket or heavy duty line to raise or lower the tools