Tool Identification
This hand tool is used to drive nails into wood.
What is a hammer?
This must always be worn to protect your eyes in the shop.
What are safety goggles?
This machine is commonly used to drill holes in wood accurately.
What is a drill press?
This type of wood comes from trees with needles and is usually softer.
What is softwood?
This tool is used to measure length in inches and feet.
What is a tape measure?
This tool has a flat blade and is used to smooth wood surfaces.
What is a hand plane?
This should be tied back or secured to prevent accidents near machines.
What is long hair?
This machine sands wood using a rotating circular disk.
What is a disc sander?
This type of wood comes from deciduous trees and is typically harder.
What is hardwood?
This fraction is equal to one-half inch.
What is 1/2?
This measuring tool has a sliding head and is used to mark 90° and 45° angles.
What is a combination square?
This is the safe way to carry sharp tools, with the blade pointed in this direction.
What is pointing down?
This machine is used to make curved cuts using a continuous loop blade.
What is a band saw?
This manufactured wood product is made of thin layers glued together.
What is plywood?
This is the total length if you add 12 inches and 18 inches.
What is 30 inches?
This power tool is used to cut curves and irregular shapes in wood.
What is a jigsaw?
What is pointing down?
What is a push stick?
This machine flattens and smooths one face of a board.
What is a jointer?
This wood defect is a circular pattern where a branch once grew.
What is a knot?
This is the angle of a perfect corner in most woodworking projects.
What is 90 degrees?
This stationary tool uses a rotating blade and fence to make precise straight cuts.
What is a table saw?
This safety rule requires checking tools and machines before use for damage or defects.
What is inspecting equipment before use?
This machine reduces the thickness of a board evenly across its length.
What is a planer?
This engineered wood product is made from wood fibers and resin, often used in furniture.
What is MDF (medium-density fiberboard)?
This math concept is used to find the area of a rectangular board (length × width).
What is area?