Safety/Pollution
The type of "soles" that should be on work boots for the shop.
What is Non-Slip?
This hydraulic device forces the shoes against the drums.
What is the "wheel cylinder" ?
Current is measured in this.
What is Amperes (Amps) ?
In tire size
P215 70 R15
the "R" represents this.
What is "Radial Ply" ?
This determines a "Standard Bolt" .
What is "Radial Lines" on the head?
We crush "old used oil filters" for this reason.
What is to get as much as possible of the old used oil out of the filter before disposal?
This device pulls the shoes away from the drum when the pedal is released.
What are the "Return Springs" ?
The force that pushes electrons through a conductor is called this.
What is Voltage?
In the Tire size
P215 70 R15
"15" represents what?
What is "Rim Diameter" ?
This determines a "Metric Bolt".
What is (Property Class) Numbers on the Head?
Part sent back to the manufacturer to be rebuilt.
What is a "core" ?
This drum brake system is anchored in one (1) position.
What is "Duo- Servo" ?
Resistance is measured in this.
What is Ohms ?
Tire Balance or Tire Balancing solves this problem.
What is "Vibration" ?
This determines "Standard Thread Spacing".
What is the number of threads in one inch of the shank ?
These two (2) things can not go in the "Waste Oil Drum" for disposal.
What is Coolant or Gas?
The shoes on a non-servo drum brake system are called this.
What are "Leading/ Trailing" ?
The formula to figure current is.
What is Voltage divided by Resistance ?
Acceptable Minimum Tread Depth is ___________
What is 3/32" ?
This determines "Metric Thread Spacing".
What is distance in millimeters between threads ?
The information on a chemical's "Flashpoint" can be found where in our shop.
What is in the SDS (Safety Data Sheet) ?
This pulls the piston away from the rotor on a disc brake caliper.
What is a "Square Cut Seal" ?
This force is around a wire carrying current.
What is "Magnetic" ?
In tire size
P215 70 R15
"215" represents what?
What is "Section Width" ?
Besides Metric or Standard, what does the grade of the bolt indicate.
What is "Tensile Strength" ?