Rando
Permit to Work
Working at Height
Advanced Permitting
Hot Work
Isolation
PRCS
100
A cowboy rode into town on Friday. He stayed in town for three days and rode out on Friday. This is possible because
What is
His horse is named Friday.
100
_________ can cancel and withdraw a permit whenever a hazardous condition develops that may compromise the safety of the job.
Who is anyone?
100
This color scaffold tag requires 100% tie off.
What is an Orange tag?
100
A permit is considered void if the work has not started within this length of time.
What is
4 Hours?
100
The entry attendant for PRCS can also function as the Fire Watch.
What is
True?
100
The Red Lock is always found here.
What is…
the Lock box?
100
When any part of the body breaks the plane, it is called this
What is a
Confined Space Entry
200
In 1997, Mike Tyson bit the ear of this opponent.
Who is
Evander Holyfield?
200
Walking out a job during the permitting process, is known by this 3 word phrase, and is required for all permitted work.
What is a Joint Jobsite Visit?
200
Fall protection is required any time we are working at this distance above grade or a lower level.
What is
6 feet?
200
This should be included in the job description section of the permit that requires vehicle entry.
What is
Entry/Exit point
200
Process drains must be sealed within this distance of all hot work activities.
What is
35 feet?
200
The key(s) for the Orange Lock(s) goes inside the Lock Box.
What is True?
200
This is the minimum isolation method to make entry into a confined space.
What is
Physically disconnected and misaligned (effectively air gapped), or blinded?
300
This is always in front of you but cannot be seen
What is
The future?
300
A permit cannot be edited while in this workflow state, which is marked with a square-shaped icon.
What is…
Live?
300
Breaks and rest decks are required at or before every _____ foot section of a scaffold.
What is
10?
300
This level risk tasks will be permitted via permit template.
What are
Low-low tasks?
300
For Low Risk Hot Work, LEL reading on the multi-gas detector should be
What is...
0%
300
This is the isolation method shown here
What is
Double Block and Bleed?
300
The entry attendant must be in radio contact with the __________ at all times.
Who is
Entry Supervisor?
400
You have two coins that equal 30 cents, and one of them is not a quarter. The coins you have are
What are
A quarter and a nickel. (The nickel is the one that isn’t a quarter.)?
400
A Permit shall be issued for a period of no longer than
What is
16 Hours?
400
This is the best way to shorten my free fall distance when using Personal Fall Protection (harness).
What is
Raise anchor point to at least shoulder level?
400
Abrasive Blasting requires this type of respiratory protection.
What is
Air supplied blasting hood?
400
All initial hot work associated with a Permit Required Confined Space Entry shall be this risk level
What is...
High?
400
From the options “None”, “Personal” and “Full,” this isolation type requires zero Lock Out; Tag Out.
What is…
“None?”
400
These are the Oxygen Limits required for entry into a Confined Space.
What are
20.0% and 21.5%
500
This NBA team plays its home games at Madison Square Garden.
Who are
The New York Knicks?
500
An LDAR technician shows up in your unit and informs you (operator) that they intend on conducting fugitive emission monitoring for VOC leaks. This will require them to climb on a tagged and inspected scaffold.
A permit is needed to complete this task. (TRUE/FALSE)
What is
False?
Verbally authorized tasks do not require permits and may be completed by climbing on tagged and inspected scaffolds using the required PPE.
500
A scaffold is required to be inspected by a competent person at this frequency.
What is
Once a shift?
500
To conduct atmospheric monitoring for INITIAL ENTRY for a confined space, the ventilation must be ________ prior to monitoring.
What is
Turned off a minimum of 30 minutes?
500
No Normal Hot Work is posted on this drawing/document.
What is
Noise Map?
500
An ICC consists of three (3) items, they are
What are
1. Isolation Matrix (which calculates the minimum requirement of process isolation)
2. Isolation Log (Lists every isolation point and status, test points, switches, breakers and Lock Box) or, for a Blind ICC, list of blinds.
3. Equipment Sketch (drawing that clearly corresponds to the Isolation Log).
500
LEL readings for INITIAL entry into a confined space shall be
What is
0%?
600
This word is spelled incorrectly in every single dictionary.
What is
incorrectly?
600
A job is not complete until this has taken place.
What is
Housekeeping
600
This person is required to inspect fall protection systems annually.
What is a Competent Person?
600
Vehicle Entry and Powered tools fall under this level of Risk permit controls
What is
Low Risk Hot Work Controls (Vehicle Entry and Powered Tools)?
600
Every time a Medium or High Hot Work permit is written, the following shall be required:
What is
1.Fire Watch
2.Fire extinguisher and/or charged water hose
3.Proper access and egress from the hot work area
4.All crew members must wear 4 gas monitors.
600
There are 2 types of ICCs, they are _____ & _____.
What are…
Energy Isolation ICC
Blind ICC
600
These are the criteria for a space to be considered a confined space.
What are
1. Is large enough and so configured one can enter an perform assigned work.
2. Has limited means of entry and egress.
3. Is not designed for human occupancy.
4. Where there is a risk of injury or health effect from hazardous substances or conditions (i.e. welding fumes, process, dye checks, motorized equipment, etc.).
700
A young boy was rushed to the hospital emergency room, but the ER doctor saw the boy and refused to operate. “This boy is my son,” the doctor said. But the doctor wasn’t the boy’s father. The ER doctor is
Who is
The boys Mother?
700
This is the length of permit validity for a Medium risk permit.
What is...
14 Days?
700
These are the 3 components of a Personal Fall Arrest system
What are..
1. Full Body Harness
2. Suspension Trauma Straps
3. Self Retracting Lifeline (SRL)
700
The following is always required for Permit Required Confined Space entries:
What are...
1.Rescue Plan
2.Ventilation Plan
3.Entry Attendant
4.Entry Supervisor
5.Notify Emergency Response of Entry
700
The welding machine return lead should be located here.
What is
The electrode in the firebox and the return lead as close as possible to the work station.
700
Many valves, but not all, can be used for isolation of process energy sources. Valves that are NOT to be used as isolation valves are:
What are…
1.) Check valves
2.) Control valves
3.) Pressure relief valves
4.) Any valve not providing adequate isolation
700
This is the requirement for the number of 4-gas meters for people in a PRCS.
What is
Every person entering the confined space shall wear 4-gas meter?
800
This is the smallest country in the world.
What is
Vatican City?
800
When a permit is drafted from a template these two workflow states are bypassed.
What are…
Verify and Authorize?
800
To ensure the proper angle, the base of the ladder should be moved outward _____ for every ____ feet that it is raised.
What is
1 foot for every 4 feet (4 to 1 rule)
800
Below are the tasks which can executed under Personal Isolation so long as these 4 conditions are met. They are...
- HVAC Work
- Instrumentation/ Analyzer Work
- Plumbing work inside buildings
- Lighting (troubleshooting/repair)
- Disconnecting and Reconnecting electrical leads inside 480V or below breaker housing.
- Troubleshooting and repairs to elevators in process units and support buildings
- Routine motor/analyzer work in laboratories
- Communication/Security/ Fire Systems
- Oil Mist Systems
- Inspecting L&H equipment
- Craft Shop Equipment
What are...
- Isolation & Work conducted by one craft during one shift
- An effective zero energy check is conducted.
- Permit Holder competent to carry out isolation and permitted work.
- The servicing or maintenance does not create a Hazard for other people.
800
At Norco, hot work must occasionally be done on Utility Systems such as air, condensate, boiler feed water, steam, nitrogen, cooling water, domestic water, & potable water.
In the past, this work was required to be completed behind a blind. There are now exceptions, name them
What are;
If design does not allow for blinding, Hot Work on utility piping and equipment 250 psi and below may be performed with a minimum of a single block and bleed.
Above 250 psi shall require a minimum of a double block and bleed.
If this cannot be achieved an Isolation Deviation Form must be used.
800
This function in PV is used to signal an isolation point that will need to be exercised AFTER the permit has been issued.
What is…
DFT or Deisolate For Test?
800
This is the minimum number of permits that must be obtained before entering and performing work inside of a confined space.
What is…
2?
Entry Permit & Permit to Work