Tools
What is the name of the tool used to remove the inner shielding material of a coax trunk line in preparation for a connector to be applied?
What are Coring tools
What material are all company ladders made from?
What is Fiberglass
What type of lanyard is used for ladder work?
What is a work positioning lanyard
What are the processes reviewed every month at a shop safety meeting called?
What is a JSA or Job Safety Anaylsis
Does Eastlink have a safety committee?
What is yes, in fact they have 6 EL committee's, one (1) Policy committee across Canada and one (1) Committee in it's Bermuda Operation!
What tool shares it's name with something you might place a lamp or statue on?
What is a Pedestal tool
What is the weight and duty rating for all field extension ladders?
What is 375lbs AA
What type of lanyard is used by bucket truck operators for fall protection?
What is a SRL, SRD or a fall arrest lanyard
What has to be done at every job site before works take place?
What is a hazard assessment!
When actively working, what does the minumim setup consist of around the van or truck?
What is a single cone placed at the front and another at the rear bumper!
What tool would one use if trying to locate a damaged line in a wall or ceiling?
What is a Dynatel or toner
Typically what is the most common length of ladder used in most systems?
What is 28ft
What is it called when a ladder starts to break down from UV exposure?
What is Blooming or chalking
When going aloft what must be checked for at the vertical down ground (If present) and at the strand?
What is stray voltage
If you've been injured at work and sought medical attention do you need to report it?
What is yes this should be brought to your manager's attention as soon as possible (With-in 24 hrs) so the proper paper work can be submitted without delay!
What tool is used in Headends to look at issues with sub-low noise levels and can be used to look at wave forms?
What is a Spectrum Analyzer
If near a pole what is the common method of securing the ladder?
What is tying off to the pole
Is the weight rating specified for a ladder, the total weight placed upon it or just your weight?
What is, the total weight place upon it.
How often must a tool or piece of equipment be inspected?
Prior to use and at regular schedueled intervals (Monthly).
Who from management has signed off on the Occupation Health & Safety Policy?
Who is the COO or Jeff Gillham
What industry specific hand tool is used to put tension on long drops?
Hint: it typically used in conjunction with a Chicago Grip!
What is the Howe Wire Tool
What is meant by 4:1 ratio in ladder use?
What is, or every 4 feet of ladder height from the ground to the support point, the base should be 1 foot away from the wall or strand the ladder is leaning against.
When climbing a ladder, what is the basic rule that must be observed by all that go aloft?
What is three (3) point of contact must be maintained, Example 2 feet and 1 hand or 2 hands and 1 foot.
If called out (on-call) or when working alone (with no department support), is there any policy that needs to be followed and support system you while working alone?
What is Lone worker policy's - Answer365
In a Pole top rescue, who's safety is the main priorty and is not to be put at risk?
Who is yours!