Personal Safety
Shop Procedures
More Shop Procedures
Specifications and Acronyms
MISCELLANEOUS!
100
During a safety check we do this.
What is lock the door and carry on class as usual?
100
We do this when oil. grease, coolant or other fluids are spilled on the floor.
What is clean it up immediately?
100
Files cut best when used in this direction.
What is forward?
100
This is the number of ounces in a quart.
What is 32?
100
When refilling the master cylinder fluid we use this?
What is clean new brake fluid?
200
This is the number one personal injury in industry.
What is back injury?
200
This is what we do before lowering a vehicle from the lift.
What is yell "clear coming down?"
200
We do this before lifting a vehicle on the drive on lift.
What is install wheel chocks?
200
.4 quarts has this many ounces.
What is 12.8?
200
The minimum legal tread depth is this.
What is 2/32 of an inch?
300
These are the three main things you need to do before using a bench grinder.
What is make sure all guards are in place, wear safety glasses a a face shield, tuck in your loose clothing.
300
We do this to used motor oil.
What is store it properly and recycle it using an authorized service.
300
Hack saw blades should have the points on the blade facing this direction.
What is toward the front?
300
The definition of the acronym FWD is this.
What is front wheel drive.
300
These are the functions of engine oil.
What is clean, cool ,and protect?
400
This type personal protection should be used when working with corrosive materials.
What is eye, hand, and respiration protection.
400
This is the proper way to torque a wheel on a vehicle.
What is torque to 40 ft. lbs. in the air and specs on the ground?
400
We use this device to prepare the surface before drilling a hole.
What is a center punch?
400
The acronym RWD stands for this.
What is rear wheel drive.
400
The engines cooling system does these things.
What is Remove heat from the engine Keep the engine warm and cool Protect the metals and components in the cooling system
500
We do this during a lock down.
What is lock the door, turn off the lights and run or fight if needed.
500
At what time do we set the valve stem when remove a tire with TPMS from a wheel?
What is 6 o 'clock?
500
This how we select the proper drill bit for drilling a hole we intend tap threads into.
What is use the tap drill chart?
500
V.I.N. stands for this.
What is vehicle identification number?
500
These are the primary chemicals used to make engine coolant.
What is ethylene glycol and water?
M
e
n
u