Stands For
Generally Speaking
The Neutral
The Branches
Anybody's Guess
100
The abbreviation GFCI stands for
What is ground fault circuit interrupter?
100
Overcurrent devices such as circuit breakers and fuses are intended to interrupt the circuit, and they must have an __________ _________ sufficient for the nominal circuit voltage and the current that's available at the line terminals of the equipment.
What is interrupting rating? 110.9
100
The _________ of the neutral conductor isn't permitted to be dependent on the metal enclosures, raceways, or cable armor.
What is continuity? 200.2
100
A branch circuit is the conductors between the final _________ __________ and the receptacle outlets, lighting outlets, or other outlets.
What is overcurrent device? Definition in article 100
100
A main bonding jumper is required to connect the ________ ___________ to the equipment grounding conductor within the service disconnecting means.
What is neutral conductor? 250.24(B)
200
The abbreviation AFCI stands for
What is arc fault circuit interrupter?
200
Splices, joints, and the free ends of all conductors must be covered with _________ that's equal to that of the conductor.
What is insulation? 110.14(B)
200
Neutral conductors # ___ and smaller must be identified by a a continuous white outer finish, a continuous gray finish, or three white or gray stripes along the entire length of the conductor.
What is 6? 200.6
200
The rating of a branch circuit is determined by the rating of the branch circuit ___________ device, not the conductor size.
What is overcurrent? 210.3
200
If the grounding electrode conductor is connected to one or more concrete encased electrodes, as permitted in 250.52(A)(3), that portion of the grounding electrode conductor that's the sole connection to the concrete encased electrode isn't required to be larger than a # ___ copper.
What is 4? 250.66(B)
300
The abbreviation AHJ stands for
What is the authority having jurisdiction?
300
Electrical Equipment must be installed in a neat and ______________ manner.
What is workmanlike? 110.12
300
The neutral conductor is more commonly referred to as the _________ conductor.
What is grounded?
300
GFCI protection is required in how many areas of a dwelling unit.
What is 10? 210.8
300
Continuity or the neutral conductor of a multiwire branch circuit must not be interrupted by the removal of a ________ _________.
What is wiring device? 300.13(B)
400
The abbreviation VA stands for
What is volt-amps?
400
Equipment that may need examination, adjustment, servicing, or maintenance while energized must have __________ ________ provided.
What is working space? 110.26(A)
400
In a cable assembly the white or gray conductor can be used for the ___________ conductor if permanently re-identified.
What is ungrounded? 200.7(C)(1)
400
The minimum number of general lighting and general use receptacle branch circuits required must be determined by dividing the total ________ _______ in amperes by the ampere rating of the circuits used.
What is calculated load? 210.11
400
When conductors are installed in an ambient temperature other than 78 deg F to 86 deg F, the ampacities listed in Table 310.15(B)(16) must be corrected in accordance with the multipliers listed in Table ____________ .
What is 310.15(B)(2)(a)? 310.15(B)(2)
500
The abbreviation MCA stands for
What is minimum circuit ampacity?
500
On a 4-wire, delta connected, three phase system, where the mid point of one phase winding of the secondary is grounded (a high-leg system), the conductor with 208V to ground must be durably and permanently marked by an outer finish __________ in color, or other effective means.
What is orange? 110.15
500
The ungrounded and neutral conductors of multiple branch circuits must be ________ or __________ together by cable ties or similar means in every enclosure.
What is identified or grouped? 200.4(B)
500
In a dwelling unit _____ or more small appliance branch circuits are required.
What is 2? 210.11(C)(1)
500
Outlet boxes for a ceiling paddle fan must be listed and marked as suitable for the purpose, and must not support a fan weighing more than ___ lbs.
What is 70? 314.27(C)
M
e
n
u