Mill Safety
Stop the spindle before making ______ and ________
Measurements , Adjustments
The best way to stop a stringy chip before it goes into the chuck is?
Stop the carriage feed
The bandsaw guide should be placed
As close to the workpiece as possible
Make sure there is clearance on the other side
before drilling a hole
Treat all unknown metals in the welding lab _____
As if they are hot
Safety glasses should be worn
At all times in the lab even during clean up
Make sure to remove the ______ before starting the lathe chuck
Chuck key
How material should be held while cutting
Securely clamped in the jaw plates. Never by hand.
Requires more RPM
Smaller drill bits
Hot metal should be handled with _____
pliers or tongs
______ Should be used to remove metal chips from the milling machine.
Brush never your hands
Any work piece that extends six inches or more beyond the lathe chuck.
Needs to be secured with a tailstock
What should be used to hold round material for cutting
Vee blocks.
Drill bits should be
Sharp and free of chips
Welders flash is the result of _______
Improper eye protection.
Long hair not tied back, medication, loose clothing, open toes, and jewelry are all
Serious safety concerns
If you are not sure of a lathe operation you should.
Review the material then request help
What is the first indication that the bandsaw blade is dull?
Tapered cut
Drilling is a process that takes _______ people
Only one person is to operate a machine at a time
What should you do if you find equipment that's considered unsafe? for instance a welding mask with a small crack in the lense.
Notify the instructor immediately.
What should be done when mounting a heavy object on the milling machine table such as a large vise or rotary table?
Get help
What should be done before making mechanical adjustments or measurements on the lathe?
Shut the machine off
What is the first step in changing out the bandsaw blade?
Turn off and unplug the saw.
When drilling, you should apply ______ pressure
firm, consistent
Safety glasses, Welding mask, Welding gloves, Welding jacket, and leather boots or shoe covers are
Mandatory to be in the welding lab.